Dynamometer Results & Comparisons - Please Help With Dyno Graph
11-25-2007, 07:28 PM
this is 1 of three dyno pulls, we made 730rwhp on the 3rd pull. we had a lot of will spend on each pull. trying to see if this is wheel spin or converter slipping. 408 nitrous motor. 100 dry 150 wet plate.
11-25-2007, 11:16 PM
it could be wheel spin try it again in fouth gear
11-25-2007, 11:42 PM
Whats your build look like. I have a 408 set-up for spray. I run a 200 shot. As for the sheet, might be wheels spin!! With spray the TRQ hit is awsome.
11-26-2007, 06:40 AM
Instead of rpm to the graph against mph.
11-26-2007, 10:52 AM
what are the rpm points the stages activate? to me, it looks more like the first kit comes on, then the second.
here's what wheel spin looks like on my 408 with a single 250 shot.
here's the same run using mph, so you can get a little better view of the run
11-26-2007, 12:08 PM
it's has a 400 trans with a dana rear with 3.73 gear. 4000 converter. motor alone made 496rwhp, but it drop to 455 since we pulled alot of timing out.
11-26-2007, 12:09 PM
That^^ is what I'm used to seeing from wheel spin. The top graph, how it loops back. Post #5.
vBulletin® v3.7.4, Copyright ©2000-2013, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO