Eastern Members - Go fast parts for sale. + TT2's
11-27-2007, 01:53 AM
I'm taking apart my car and I may sell some of my project, and some old go fast stuff. Any interest let me know
Pacesetter Longtubes. Headers were on car for 2 years. Little signs of wear on the bottom, and I had to cut maybe an inch off the bottom of the flanges. No big deal, still can slip exhaust on and clamp, or weld up if needed. I saw a brand new set going for 250
Stage 3 5.3L heads from HPE. These heads brand new assembled are $2,300 dollars. These heads were on a car for 1,500 miles and taken off. They have springs assembled.
$1,700 + shipping $1,700 picked up
Ported and Polished Throttle Body, and LS6 intake manifold These two were on car for 8-10,000 miles. Car prior maybe 10,000. Both in excellent condition. Both helped net me 426/394 cam only.
Torque Thrust II Rims. Rims in excellent condition, but do need to be shined up a bit. No curb rash, but maybe half inch surface scratch on p/s front. Probably will come out with buffing out a good amount. Tires in the rear have about 50% life left, the fronts around the same. The p/s front tire does have some uneven wear on them due to being run a little low on air due to a valve stem cam leak that was fixed.
$1,000 picked up. Do not want to ship these.
I also have a LS1 block that is still in the car, but coming out in the next few days once I find a hoist. I don't know what these go for these days so if you want it please offer a price. I don't want to get low balled.
Pictures will be up soon, pm me or post here. I check LS1tech often. Don't be afraid about buying from me, I've done a large amount of transactions on here, and my feedback reflects that.
Again thank you for looking, and my project build can help you with yours :)
11-27-2007, 02:22 AM
Don't be afraid about buying from me, I've done a large amount of transactions on here, and my feedback reflects that.True, Chris is a legitimate dude and a good seller (and good buyer too for that matter), these parts are exactly as described. :nod:
11-27-2007, 07:22 AM
What size are the TT2's?
11-27-2007, 01:10 PM
TT'S are 17x11 and 17x9.5
11-27-2007, 06:34 PM
def interested in headers, pics when possible...are they emissions or not? getting rid of the Y?
11-27-2007, 07:19 PM
Is the block bare or complete? Definitely interested
11-27-2007, 08:31 PM
It would be a complete motor minus the cam, heads, intake manifold, and tb.
Headers have emission bungs. I have a complete set of true duals that I could sell with the headers. Pics will be up probably thursday
11-28-2007, 02:39 PM
very interested in headers and the duals...just need to see some pics. maybe some under car clearence shots as well?
11-28-2007, 02:47 PM
Chris, you are selling the duals as well? I should've asked ya that when we talked the other night.
11-28-2007, 02:58 PM
any pics of them rims and tires what size?
11-28-2007, 08:55 PM
I will be getting pictures up probably tomorrow.
The pictures of the duals will not have clearance shots because they are off the car. I had TSP true duals on the car like 3x and then went with these custom true duals.
These duals are 2.5" all the way out I think it is (will re-measure tomorrow) they have gutted cats welded in, and have tips with dual dual tips out the back. They run under the axle. I might have a picture of what they look like I've got to search a bit. They sounded great. Very toned inside, and loud when you wanted them to be. They were welded to my headers that's why the inch was cut off so I could get the headers out of the car. The tips too were cut to remove the rear after I blew it up. but everything is easily accessible to weld back up. The driver side pipes that come off the flange have a welded attachment with a piece of felt to prevent knocking on the floorboard (common problem)
As for the rims, I will try to shine them up tomorrow and get you guys some pictures. The rims are 17x11, and 17x9.5. They are in great condition, and LOVE the way they look on the car. I just have no use for them over the next year, and would rather have the cash than have them just sit on the car.
11-28-2007, 10:47 PM
i would like the headers definately, possibly the duals too. pm me =)
11-29-2007, 10:15 AM
They are yours if you want them. Rest of the parts are still for sale
11-29-2007, 11:18 AM
11-30-2007, 12:39 AM
Damn Chris, ship the RIMS to me!!!!
12-01-2007, 05:46 PM
Pictures will be up tomorrow. Finally a day off. I got the pictures already just got to upload them to the PC.
12-01-2007, 06:49 PM
excellent cant wait to see them-enjoy the day off
12-02-2007, 11:00 AM
Here you go. I will try getting pictures of the rest of the stuff later, just here is what has had some interest
Headers. Like stated before a little discoloration where the flanges are, but nothing serious at all. Still perform great.
Here are the duals with gutted cats. As you can see where they were cut. But these are also fine. No worries in purchasing. LS1LT1 can chime in and say how they sounded
Exhaust tips. Kind of a bad picture, but you guys get the idea
Passenger rear TTII, as you can see very top there is a SLIGHT ding in the rim. You cannot even tell it's there
Passenger front rim. This was the one explained with the SLIGHTEST rash that may even polish out over time.
And a couple fun pics
LS1 motor picture
12-02-2007, 11:20 AM
selling the 3rd gen?
12-02-2007, 12:00 PM
Hahaha no, that's my buddies project car. He's putting an LS1/T56 combo into that car. Cars in good shape for an 87, just his apartment complex told him he had to move it or it was getting towed.
12-02-2007, 07:45 PM
12-04-2007, 11:05 AM
Pending sales on the ls6/pptb and the full exhaust.
Everything else is for sale still.
12-05-2007, 09:12 AM
ttt for the day. Sooner I get rid of this stuff sooner I start my new project :)
12-06-2007, 11:32 AM
Any interest in these?
12-10-2007, 12:23 AM
12-10-2007, 10:54 AM
http://i66.photobucket.com/albums/h262/WhozNxtLS1/gay001.jpgHey is that a Bronco in the background, I love those old Broncos, is it for sale? :D ;)
12-11-2007, 12:06 AM
Hahahaha actually it's kind of sold to a buddy of mine. I told him 500 down, rebuild the trans then pay me another 500, so I'm cutting him a deal
12-11-2007, 12:13 AM
Hahahaha actually it's kind of sold to a buddy of mine. I told him 500 down, rebuild the trans then pay me another 500, so I'm cutting him a deal...and a good deal it is. :nod:
12-11-2007, 09:59 AM
Yeah....stuff is still for sale. Sooner this stuff goes the sooner I drive a 6" lifted cummins diesel on 37's
12-16-2007, 01:05 AM