Exhaust Tips Hitting Bumper
06-23-2003, 05:15 PM
#1
Launching!
Thread Starter
Join Date: Jan 2002
Location: Yucaipa, CA
Posts: 270
Likes: 0
Received 0 Likes
on
0 Posts
Exhaust Tips Hitting Bumper I installed my AAP Y-Pipe and it has made the Loudmouth tips hit the bumber on the car. I have done a lot of laying with it, but I am having trouble getting it to stay. Any suggestions? I was considering just going with MAC Headers and using their Y-Pipe and cats. But I really like the look of the AAP Y-Pipe. Looks like quality work. I would appreciate any help you guys can offer.
06-23-2003, 05:18 PM
#2
Moderator
iTrader: (11)
Join Date: Mar 2002
Location: East Central Florida
Posts: 12,605
Likes: 0
Received 6 Likes
on
6 Posts
Re: Exhaust Tips Hitting Bumper Raise the middle joint to drop the back. Might have to
loosen the front joints as well as the Y-I, jack the
center up to shimmed tight (want at least 1/2" to keep
from banging, between exhaust and any close metal all
down the line). Might look for a longer rubber hanger
isolator thingy if this is how the back end is hung.
loosen the front joints as well as the Y-I, jack the
center up to shimmed tight (want at least 1/2" to keep
from banging, between exhaust and any close metal all
down the line). Might look for a longer rubber hanger
isolator thingy if this is how the back end is hung.
