New SLP Lid...
12-08-2007, 02:30 PM
#1
New SLP Lid... First off I want to thank MarylandSpeed for a nice delivery, But back to the lid. Everything went pretty fine, until i got to removing the IAT sensor, whoa that was bitch! haha and even worse trying to get it onto the new lid. Then i thought i would be quickly done after that, but trying to slide the MAF into the new lid was tricky, i seriously tried to force it in but after about 20 minutes i knew it wasn't happening. So i remembered that i used the hairdryer to take it off the MAF, so i used it again to put it back on, and i was right, it was back on in a couple minutes. Now the fitment was a little off, as in it wouldn't clamp together right, so i loosened the accordion thing and twisted it until it felt right, and now it fits perfect 
The question if i felt any difference? i'd say no, but reason being because i already had whisper lid for a 98-00, and my car is an 01, so that AIR hose was just sticking out. Now I'm good...
The question if i felt any difference? i'd say no, but reason being because i already had whisper lid for a 98-00, and my car is an 01, so that AIR hose was just sticking out. Now I'm good...
12-09-2007, 09:47 AM
#4
TECH Fanatic
iTrader: (28)
Join Date: Feb 2006
Location: Williamsville, NY
Posts: 1,131
Likes: 0
Received 0 Likes
on
0 Posts
Got the same lid and like you removing that sensor was a pain. I was so nervous I was gonna break it. I see you already have the "rubbing on the hood" spot too like most people. Anyways, its time to replace those stock headers now 
12-09-2007, 10:23 AM
#5
12 Second Club
iTrader: (20)
Join Date: Sep 2007
Location: Drexel Hill
Posts: 476
Likes: 0
Received 0 Likes
on
0 Posts
i got the flopac.... it feels to be more responsive low end.... and makes a pretty loud and heavy intake noise now......... im hoping thats because it flows better!
but yea i had some trouble getting the maf in the lid
does your lid hit the hood??? up by the neck
but yea i had some trouble getting the maf in the lid
does your lid hit the hood??? up by the neck
Trending Topics
12-10-2007, 05:49 PM
#12
TECH Senior Member
iTrader: (1)
Join Date: Apr 2005
Location: Vancouver,[KITSILANO].B.C. Canada *WestCoast*
Posts: 8,810
Likes: 0
Received 0 Likes
on
0 Posts
I have an 7-8 year old SLP Lid...the embossed 'SLP' logo is only black......guess they decided awhile back to paint it white...mine fits well, always has........
