Generation IV Internal Engine - piston to valve clearance

has anyone ran into clearance issues between the piston and valve with putting l92 heads on a ls2 bottom end?

i'm very interested in this shortblock
http://www.ls1tech.com/forums/showthread.php?t=803300

the current owner had heads with a 2.08 intake valve on and the l92's that i'm looking at have a 2.165 intake valve

Make sure your get a l92 friendly piston. We had to build all of our pistons for a bigger valve configuration to have clearance for the l92 valves.

Jason


has anyone ran into clearance issues between the piston and valve with putting l92 heads on a ls2 bottom end?

i'm very interested in this shortblock
http://www.ls1tech.com/forums/showthread.php?t=803300

the current owner had heads with a 2.08 intake valve on and the l92's that i'm looking at have a 2.165 intake valve

do you have any other pistons other than the one listed on your site?

http://www.texas-speed.com/shop/item.asp?itemid=787&catid=38