10 Second Club - h/c for 10's

Looking for a good head cam package for the camaro. qtp headers tsp duals ,ls6 intake, ported t-body, pulley, tci 3500 stall, 3.73 gears. are my mods so for. tips on your combo. I'm looking at ms3 and tsp stage 2.5 5.3 heads. car has 70000 miles on it. going to top end rebuiled

I would look into CARTEK they are in Garwood NJ. Top notch shop thats been putting alot of heads and cam cars way into 10's for many years now. 908-317-4496

I would look into CARTEK they are in Garwood NJ. Top notch shop thats been putting alot of heads and cam cars way into 10's for many years now. 908-317-4496

Is 10.32 with a stock bottom end and H/C good enough? If so, Call CARTEK ;) LOL

cartek makes some of the best stuff

Thats where my FRC is at right now. :D :D :D

Is 10.32 with a stock bottom end and H/C good enough? If so, Call CARTEK ;) LOL

I saw videos of your car man. Thing is sick. Gota give you props on your times.

how much would a car have to weigh to get in the 10's with H\C?

When I went my 10.98 my car weighed in at 3528 raceweight. I'm sure I could have clicked off atleast a 10.70 that day. Only got one run though, after sitting in the lanes at Atco for 3 hrs.

Is 10.32 with a stock bottom end and H/C good enough? If so, Call CARTEK ;) LOL

Nah I'm waiting for you to click off a 10.1x. I think you need to put someone in that car that can drive, like me:jest:

Is 10.32 with a stock bottom end and H/C good enough? If so, Call CARTEK ;) LOL

did you have to flycut your pistons with the 4x setup?
I've been thinking about getting the 3x setup for my camaro as long as I don't have to flycut or worrya bout PTV(is that right lol) clearance.

did you have to flycut your pistons with the 4x setup?
I've been thinking about getting the 3x setup for my camaro as long as I don't have to flycut or worrya bout PTV(is that right lol) clearance.

I had my pistons fly-cut for the 3X setup that was previously on the car before the 4X setup went on.

When the 4X heads were installed, knowing that I would be reving to 7200 and shifting at 7000rpm, they fly-cut the pistons a little more still LOL

Who cares, makes the piston lighter! Rev's faster, more power! LOL J/K

Nah I'm waiting for you to click off a 10.1x. I think you need to put someone in that car that can drive, like me:jest:

Well the record is 10.10 held by Amber and Joe, I would like to take that number in the spring. We'll see!

I saw videos of your car man. Thing is sick. Gota give you props on your times.

Thank you!