steped up vortec t-trim
#1
Teching In
Thread Starter
Join Date: Oct 2006
Location: buckley WA
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
steped up vortec t-trim
well i steped up to the plate and got a vortech t-trim package from a member on another forum. man i cant wait to get back from korea!
well i guess i wont be going with the big nitro shot now! sorry rob i had to cross over to good of a deal. any one that has a s/c step in and tell me what hp numbers ur geting on stock internals.
well i guess i wont be going with the big nitro shot now! sorry rob i had to cross over to good of a deal. any one that has a s/c step in and tell me what hp numbers ur geting on stock internals.
#3
10 Second Club
iTrader: (4)
Join Date: Feb 2004
Location: Marysville, WA
Posts: 9,448
Likes: 0
Received 0 Likes
on
0 Posts
Sweet! I think Todd made high ~475rwhp with his P1-SC on a stock motor. That was at ~7psi. But you're putting a T trim on a stock short block? How much boost are you going to push? Anymore than 8 & you are asking for trouble.....those are good for ~15 as I recall.
#4
Teching In
Thread Starter
Join Date: Oct 2006
Location: buckley WA
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
i dont know how much boost yet! im probably going to start with a 30 tooth cog on both ends i believe on the t-trim its 7lbs i still have to check with vortech. those are good to 26 lbs or 825 hp so vortech's wabsite say's. if i end up blowin the motor its a good excuse to get a forged shortblock. im thinkin 383
Last edited by 383-LT4; 12-26-2007 at 05:15 AM.