Little closer with the APS TT and 402
#1
9 Second Club
Thread Starter
iTrader: (17)
Join Date: Nov 2002
Location: New Braunfels ,Tx
Posts: 4,997
Likes: 0
Received 0 Likes
on
0 Posts
Little closer with the APS TT and 402
Well Im down to the exhaust,snow meth kit and misc wiring. I must say between working and my family lately I have had no time for my ride. Here are some pics of the exhaust and Ill have a cool little video of it done today. I wish my cutouts were here but DMH took there sweet *** time to get them to me So Ill have to wait on the cutouts till Monday. Then the v bands go on and a little grinding for coating.
Trending Topics
#10
9 Second Club
Thread Starter
iTrader: (17)
Join Date: Nov 2002
Location: New Braunfels ,Tx
Posts: 4,997
Likes: 0
Received 0 Likes
on
0 Posts
20 G's. There ok for this setup,. Not the best due to backpressure issues but they will do the job I hope.
Yup.
Thanks killa! Just need to figure out this dam e boost 2 Not too user friendly! Finished every stinking nick nack yesterday. So there are no more loose ends. All that is left is the meth kit and the exhaust. I left around 8:00 last night because I was worn out. My partner should have finished or got close to finishing the duals. Just need to mount the DMH cutouts which should be here today Here a couple of pics I snapped of the new wheels. Nevermind the blue tape. I put it on there to protect the rims when they were getting mounted. Ordered the right lug nuts for these so there be here today So I can leave them on there.
Yup.
Thanks killa! Just need to figure out this dam e boost 2 Not too user friendly! Finished every stinking nick nack yesterday. So there are no more loose ends. All that is left is the meth kit and the exhaust. I left around 8:00 last night because I was worn out. My partner should have finished or got close to finishing the duals. Just need to mount the DMH cutouts which should be here today Here a couple of pics I snapped of the new wheels. Nevermind the blue tape. I put it on there to protect the rims when they were getting mounted. Ordered the right lug nuts for these so there be here today So I can leave them on there.
#13
TT-TECH Veteran
iTrader: (29)
Wheels look great and so does the car. The Eboost is easy bro call me if you can't figure it out I was confused at first also, but remember the number you are putting in for your boost set point is an arbairary (sp?) number 10lbs could be 18 it isnt going to be 10 that is for sure lol! The number is the number of times it is going to pulse the noid open to send boost back to the top of the wastegate etc... Your overboost how ever is the acctual boost level such as 10 would really be 10lbs etc... Tom aka Onfire helped me out when I first started using it and the quick talk with him about the numbers and it was like a light going on I understood everything I was reading at that poimt.
Last edited by Inspector12; 01-04-2008 at 01:03 PM.
#14
9 Second Club
Thread Starter
iTrader: (17)
Join Date: Nov 2002
Location: New Braunfels ,Tx
Posts: 4,997
Likes: 0
Received 0 Likes
on
0 Posts
Wheels look great and so does the car. The Eboost is easy bro call me if you can't figure it out I was confused at first also, but remember the number you are putting in for your boost set point is an arbairary (sp?) number 10lbs could be 18 it isnt going to be 10 that is for sure lol! The number is the number of times it is going to pulse the noid open to send boost back to the top of the wastegate etc... Your overboost how ever is the acctual boost level such as 10 would really be 10lbs etc... Tom aka Onfire helped me out when I first started using it and the quick talk with him about the numbers and it was like a light going on I understood everything I was reading at that poing.
#17
TECH Addict
iTrader: (9)
Wheels look great and so does the car. The Eboost is easy bro call me if you can't figure it out I was confused at first also, but remember the number you are putting in for your boost set point is an arbairary (sp?) number 10lbs could be 18 it isnt going to be 10 that is for sure lol! The number is the number of times it is going to pulse the noid open to send boost back to the top of the wastegate etc... Your overboost how ever is the acctual boost level such as 10 would really be 10lbs etc... Tom aka Onfire helped me out when I first started using it and the quick talk with him about the numbers and it was like a light going on I understood everything I was reading at that poimt.
And thats a ok size turbo its going to be a torque beast
#20
TT-TECH Veteran
iTrader: (29)
***** you couldn't finish! Just kidding still working on my project hoping to paint tomorrow etc... Just give me a ring and I'll help you on that Eboost stuff I just used the eboost boost reading to set it started low and kept changing the number to get what I wanted etc... Although Tom's number got me 15lbs right off the bat LOL!