MS4 scares me, going with Tqv.2 some questions:)
#1
MS4 scares me, going with Tqv.2 some questions:)
ok guys i bought a MS4 and the more i think about it the more i think it's too much cam for what i'm gonna need. So i've been searching and will be selling the MS4 here soon and going with a Torquer 2 with a 112 LSA. My question is, can i run that cam with unmilled Z06 heads and a thinner gasket(.040) and not have an issue with PTV clearance? Or should i stick with stock gaskets thickness gaskets. All my mods include, Z06 heads, LS6 intake and T/B, ASP underdrive, TSP longtubes, and now the different cam. Any input on this would be great guys. Thanks.~Cole~
#2
11 Second Club
iTrader: (17)
Join Date: Mar 2005
Location: Maryland
Posts: 4,796
Likes: 0
Received 0 Likes
on
0 Posts
i think you will be ok with the stock z06 heads, with the .040 gasket and the t2. but im sure others on here will know for sure.
i dont see the point in just puting new head gaskets on unless there blown or your swaping heads
i dont see the point in just puting new head gaskets on unless there blown or your swaping heads