93blacktransam

iTrader: (6)

im doing a custom rear mount but i need some help.......with the oiling part....and psi i should push the wastegate i have is 6psi is that to much for my car ........im doing it the cheap way such as junkyard turbos camaro....but as i get money im replacing each part with a beater quality item.........and do i need a boost gauge starting off....

93blacktransam

iTrader: (6)

this is what i have soo far what else do i absolutly hafta have?



http://cgi.ebay.com/ebaymotors/ws/eB...189311424&rd=1

http://cgi.ebay.com/ebaymotors/ws/eB...203051368&rd=1

http://cgi.ebay.com/ebaymotors/ws/eB...206027763&rd=1

http://cgi.ebay.com/ebaymotors/ws/eB...204170604&rd=1

http://cgi.ebay.com/ebaymotors/ws/eB...209462175&rd=1

http://cgi.ebay.com/ebaymotors/ws/eB...200090949&rd=1

y2khawk

iTrader: (5)

oh boy

aleast skim this
https://ls1tech.com/forums/forced-induction/208864-turbo-faq.html

smoke20

iTrader: (2)

93blacktransam

iTrader: (6)

I read it lol

frcefed98

iTrader: (16)

I'm all for DIY projects....but cheap and turbo are like oil and water....just be prepared for your wallet to start bleeding cash sooner than later...

Turbo, WG, BOV, Oil pump for the rear mount, ability to tune the car for the turbo, colder plugs, flanges, some sort of intercooler, bigger injectors, upgraded fuel pump(s), exhaust wrap for the hotside tubing, oil feed line, oil drain line. Fuel pressure, boost pressure, and oil pressure as well as tranny temp are all great gauges to have and I feel mandatory for a boosted car. Do you have a welder? That is a basic list, you'll need more.

93blacktransam

iTrader: (6)

yea i whole shop lift all that to.......where can i get a cheap pump

70Stang

iTrader: (2)

All of those parts are garbage.

93blacktransam

iTrader: (6)

i know that

70Stang

iTrader: (2)

So, why would you buy garbage?

1fastz

iTrader: (16)

93blacktransam

iTrader: (6)

as put up top i bought cheap **** to start with for my first turbo project on a $5,000 car....if this setup works i will replace each compnent with high dollar parts....this is just a small project for my local in town race we have once a year........if this was anyhting serious i would just buy the sts kit.....so i am just asking for some help not bashing....ive never done this and iv been reading for hours lol......i got most of it down except the wastegate and oil part......so someone please help not bash....

longrange4u

iTrader: (2)

Ok... one... I reccomend that you dont post in this thread anymore because your gonna get some negitive attention from the FI community... most of us have put 20+k into mods on our cars easy...

Second.. and more importantly. IM Zombie.... he has the best "Budget" 10 second FI car I have ever seen.. if you want to know how to do it cheap.. and right... talk to him. He will better be capable to help you then anyone I know on this board...

Urban Legend

iTrader: (5)

I will never add up how much I have blown on my car. But it is well into 5 digits. Easily.