Disturbed Bird

iTrader: (9)

i know i need a hardened push rod but what length?

i bought patriot performance stage 2 with 59cc

spookyz28

What year is the car, what kind of head are you running, are the head's milled at all. If stock go with cromoly comp cams 7.400

spookyz28

my bad with your head's the 7.400 should be fine.

Disturbed Bird

iTrader: (9)

ya i dont know if they are milled or not.

vettenuts

iTrader: (4)

Spend $20, buy an adjustable pushrod and measure. That way you know for sure.

bjamick

iTrader: (31)

Im sure you will be just fine with a 7.4 hardened. If you just want to know then measure but most of the time a 7.4 will work just fine.

allthrotle

iTrader: (2)

Im running 7.4's with the same heads. the Patriot heads have not been milled. You can run the stock pushrod length. If your looking for a good set of pushrods on a budget then get the trick flow's. Theyre 5/16 chromemoly with a .080 wall. You can pick them up for like 87 dollars plus shipping.

Disturbed Bird

iTrader: (9)

cool thanks

JPH

iTrader: (2)

yeah, I agree with everyone else and you should be okay with 7.400. Doesn't hurt to verify though.