How can I block off the EGR on my intake?
07-01-2003, 08:18 PM
#2
TECH Fanatic
iTrader: (15)
Join Date: Jan 2003
Location: ThirteenHundredPostsVille, CA
Posts: 1,293
Likes: 0
Received 0 Likes
on
0 Posts
Re: How can I block off the EGR on my intake? Here is a whole guide on how to remove the system
http://www.ls1camaro.net/sections.ph...e&artid=70
As mentioned in that link, use a 1 3/8 freeze plug--availably at most parts stores for $3-4. I ran one of those on my intake for close to six months before I got my LS6 intake
http://www.ls1camaro.net/sections.ph...e&artid=70
As mentioned in that link, use a 1 3/8 freeze plug--availably at most parts stores for $3-4. I ran one of those on my intake for close to six months before I got my LS6 intake
07-03-2003, 01:00 AM
#4
TECH Fanatic
iTrader: (4)
Join Date: May 2002
Location: Locust Fork, AL
Posts: 1,550
Likes: 0
Received 0 Likes
on
0 Posts
Re: How can I block off the EGR on my intake? if you want a more "factory appearance"
go with GM part #12558346
its basically a piece of metal with an O-ring on the bottom to seal the intake
i was told it was originally made for the Hummers
btw I paid $11.32 plus tax
go with GM part #12558346
its basically a piece of metal with an O-ring on the bottom to seal the intake
i was told it was originally made for the Hummers
btw I paid $11.32 plus tax
