kilgore

this is what i put down with full exhaust, intake and a maf. what can/should i do next to see gains.. i know many people have different thoughts but i just want to hear a couple.
thanks

Tainted

iTrader: (9)

that seems kinda low...when you say intake did you mean a lid or the intake itself?

but anyhow:
under drive pulley, intake manifold, P&P TB, TUNING

kilgore

sorry yes i did mean a lid and those numbers are after a tune

Tainted

iTrader: (9)

ahh ok, I was thinking LS6 intake and looking at those nubmers I was like hmm somethings up with that.

but yea make your next 2 mods an LS6 nitake (300 shipped all day long going price) and a P&P TB, send it to Tim or Bo White, either one is great. Personally I sent mine to tim since he did it for 40 bucks. those 2 mods should have you around 350ish

kilgore

where could i go about finding the ls6 intake for 300? and how hard are they to install, i mean ive read up on it but just wondering how difficult it is

Tainted

iTrader: (9)

oh its an easy install just be careful of the oil pressure sending unit. you can get them on e-bay and the for sale section nearly everyday

bryan04h

iTrader: (2)

post a "wanted" thread in this site and you should get quite a bit of responses for a ls6 intake anywhere from 300-350....as for installing it, it is easy..im sure you have seen the site but here it is anyway, nice lil step-by-step guide
http://ls1howto.com/index.php?article=5

kilgore

ok thanks for the help

LS1-NAVY

iTrader: (1)

LS6 intake, cam, ud pully

GG01SS

iTrader: (1)

Kilgore is your car an A4 or M6? Numbers not bad for A4, get a higher stall converter if you have an Auto.

Tainted

iTrader: (9)

its an M6 his mod list has a B&M ripper shifter

WS6NIGHTMARE

iTrader: (7)

My mods are the same and my car dynoed 320/342 through an A4, so Id say his are right on par. LS6 intake is next mod on the list.

kilgore

thats what im thinking... i do have a tb laying around that i just never put on.. well i attempted to put it on but its longer than the stock tb and i couldnt figure out how to get the throtle cable longer so i just gave up on it