No Spark On The #1
01-15-2008, 10:18 PM
#1
TECH Apprentice
Thread Starter
Join Date: May 2005
Location: Huntsville, AL
Posts: 314
Likes: 0
Received 0 Likes
on
0 Posts
No Spark On The #2 coil Have a friend that just done a ls1 swap into a 3rd gen. Well, he is not getting spark on the #1 cylinder. He took teh wire and coil and changed it and still no spark. All others on that bank works. Any suggestions?
Last edited by Prin; 01-16-2008 at 08:26 PM.
01-16-2008, 08:01 AM
#2
On The Tree
iTrader: (4)
Join Date: Mar 2007
Location: Decatur, AL
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
its #2 cylinder. i did swap the coil and wire with #4 and no change. no fire at all coming out of #2. i guess it would have to be a wire or connector. i have a painless harness. any other suggestions? thanks.
01-16-2008, 08:25 PM
#4
TECH Apprentice
Thread Starter
Join Date: May 2005
Location: Huntsville, AL
Posts: 314
Likes: 0
Received 0 Likes
on
0 Posts
Alright, it has fire coming out of the connector, but nothing going into the coil pack. Does anyone knows of anything? We could only get the tester to read the pink wire which is hot.