BLACKHAWK1998

Does anyone know anything about this cam or is using this cam? If so what kind of rwhp are you getting with what kind of mods?


54-000-11
LS1 3724R / 3725R HR112.0
Cam SPE INT EXH
ADV DUR: 277 279
DUR @ .050: 228/230 LOPE SEP: 112.0
VALVE LIFT: .588 .591

Unaffliated Racing

iTrader: (15)

This is a very relative question. If you are thinking this would be a good cam for your motor in your sig...you need to make other arrangements.....

Shawn @ VA Speed

iTrader: (3)

that would be a good cam in a 347 with stock heads-in the 400rwhp range

BLACKHAWK1998

i was thinking of putting the cam in my sand rail. i want to push around 500rwhp.

1BADBLACKBIRD

iTrader: (2)

I have this cam in 114.0 LSA.....451RWHP, 411RWTQ
TEA 1.5's stock bottom end 346ci, Auto, 12 bolt, 3600Yank, Kooks with cats, Magnaflow catback, 92/92....full weight car 3800lbs.

redtail2426

iTrader: (10)

i have that cam but on the Xe lobes with 570 lift.The one you are looking at has the better xer lobes.I still put down great power with mine though.

outlawnova

iTrader: (4)

my buddy had this in a stock bottom end 98 ss with patriot heads, bbk intake, hooker headers 4.10 and this bitch would scream. low and behold he sold it and im currently looking for this cam to put in a ls car so if anyone knows where i can buy one pm me

slammedc5

iTrader: (1)

This is the england green Mayhem2 cam. I am installing mine this week. With all new valvetrain etc. headers. 230s/240s duration on a 113lsa 630 lift. 6 speed car stage 2 clutch.

94Z28-MSTGKLR

iTrader: (20)

That cam looks close to the 228R that I'm looking at pairing with a set of PRC 215's. Should be more than enought to have some fun in a sand rail.

The BallSS

iTrader: (9)

Interesting. I also have a 54-000-11 but my specs are different.
LS1 13159R/13159R HR115+2
230/230 @ .050 .608/.608 115 LSA
It's currently in the signature car, runs pretty good.

96capricemgr

iTrader: (1)

all the cool kids are necro-posting these days