therobman

iTrader: (39)

a little crappy idle clip of my t/a with full bolt ons and a torquer 2 it doesnt wanna hold the idle to well lol. its missfiring a little is that cause of the no tune or what?
http://www.youtube.com/watch?v=zx2IOH4NREo
http://www.youtube.com/watch?v=rPemlaLZYa0

MM98

iTrader: (13)

Stock tune + 10* overlap cam + a4= horrible idle... Your iac counts are probably close if not completely maxed out, tunning & increasing the size of the hole in the tb blade will help bring the counts down & control your idle, as well as having the idle speed bumped up to around 800-900 rpms... But I don't recommend drilling your tb hole unless you have a way of keeping an eye on your iac counts... And a random missfire code is very common with the addition of a cam too.

therobman

iTrader: (39)

the holes already drilled in the tb and it idles at like 6-700 maybe i should go a little bigger

MM98

iTrader: (13)

No, I would have the car properly tuned & depending on the lsa of the cam, have them bump the idle speed to around 800-850.

therobman

iTrader: (39)

yea thats what im going to do and its on a 112

MdFormula350

iTrader: (4)

wow I am all for choppy idle but yeah tune that bad boy soon!

TXZ28LS1

iTrader: (5)

sounds nasty!!!! in a good way

LS1HIGHLIFE

iTrader: (8)

Mine did the same thing. A good tune will definitely take care of that.