Wsteun

iTrader: (3)

P/N is 12573572, this is the one off of the Z06. It's going onto my 98 z28. I read somewhere that there was a difference in something. I honestly don't know? Just figured it would be easier to ask, because the search is wacky sometimes on here.

What do I need besides the coolant lines?

BIG_MIKE2005

iTrader: (116)

only thing that should be different is the coolant tubes under the intake & the EGR being gone unless you got one with it. Other than that just swap it out like normal.

Wsteun

iTrader: (3)

K, I heard something about some sort of bracket thing or something.

Has no EGR, and the coolant lines are in the mail from WS6store.

There's no foam on the bottom side either, does that matter?

BIG_MIKE2005

iTrader: (116)

Not really, if you feel you need the foam, take it off your stocker & glue it to your new one. No different brackets that I can think of.

motoo344

iTrader: (19)

You don't even need the coolant lines. Just knock the ribs off the bottom of ls6 intake and it will fit just fine. Other than that, you don't need anything else.

Wsteun

iTrader: (3)

Ok well, the coolant thing is in the mail, waiting on the EGR blockoff for my headers and gonna have a buddy find out about getting me some new knock sensors and an updated harness.

Thanks guys.

King Nothing

iTrader: (9)

remember be careful with your oil sending unit