fuseone

what is a good head and cam set up i really dont want to have to fly cut the pistons so which would be a good set up looking for somthing around 400+ hp?

MrElectric03

iTrader: (71)

I am looking for a kit also...try TSPs stage 1.5 or 2.5 head and cam kit with the ported 5.3 heads or look at Speed Incs H/C package with the Patriot LS6 ported heads and comp cam.I am torn between these two at the moment...I dont think you will have any problem getting 400rwhp from either with some bolt ons.

SonnyG

TSP on heads and cams. From my research it seems to be "The best bang for the buck!"

I was looking into a similar setup as CALL911.....Let me tell you I almost thought I was dreaming....Cant wait for taxes....

Shawn @ VA Speed

iTrader: (3)

you dont need all of that for 400rwhp,we have gotten 430+ rwhp with stock 035 ls2 heads and our 228 cam and still is totaly street friendly

MrElectric03

iTrader: (71)

Yea I think so too...just waiting for a flow chart on the heads to make my decision.Plus when you buy it you get a discount on the timing chain and oil pump and gasket set so its great....

Fifedogg

iTrader: (15)

I wouldn't go with the Patriots IMO. I just bought stage 1 LS6 heads w/ a 224 cam from Texas speed and got a great deal. I can't wait to install these. I have heard of Patriots not flowing as good as the one's from Texas Speed. Also Texas Speed uses actuall 243 or 799 Castings while Patriots dont. Go for the 5.3's or the LS6's from Texas Speed IMO.

MrElectric03

iTrader: (71)

I have heard that they didnt use real LS6 castings but now they do use real 243 castings...I really like TSPs pricing...jus waiting on a flow cahrt to make my decision