anybody use this shop East Coast Supercharging
02-10-2008, 12:29 PM
#1
TECH Fanatic
Thread Starter
iTrader: (1)
Join Date: Nov 2007
Location: NJ
Posts: 1,193
Likes: 0
Received 0 Likes
on
0 Posts
anybody use this shop East Coast Supercharging looking for info on this shop East Coast Supercharging, located in Cream Ridge NJ
good work/ nice people /good prices Who has use them?
good work/ nice people /good prices Who has use them?
Trending Topics
02-11-2008, 01:11 PM
#9
On The Tree
Join Date: Apr 2004
Location: flemington, NJ
Posts: 194
Likes: 0
Received 0 Likes
on
0 Posts
I took my engine to them to be built and had them tune the car. installed the engine myself. rear main leak like crazy from the get go. They wouldnt even give me a seal leat alone replace it even though they installed the damn seal. Tune wasn't exactly the best in the world, but ok i guess. they are a tad pricey. Took the car to TTPerformance up in north jersey after i put a smaller pully on and they retuned it perfect. While i was at TTP I got a chance to see a bunch of their work and talk with the guys there. Top notch work and very noligable guys. I would strongly recomend them as another option.
02-11-2008, 04:39 PM
#11
Staging Lane
iTrader: (1)
Join Date: Jun 2007
Location: Brownsville, Tx.
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
Yes I just bought a SC kit from them for my C6. They are REALLY cool people to do business with! If I was closer I'd have them do the install. Gave me a great price on the kit too! Everyone else I have talked to has nothing but good things to say about em.
02-12-2008, 05:36 PM
#13
Teching In
Join Date: Aug 2005
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
When I started drag racing my Z06 about 2.5 years all the guys I ran with used ECS and always had great things to say about Doug & Chris.. 2.5 years later and all of those guys still have the same great things to say about Doug & Chris.. When I decided to have the turbos installed I was debating on who to use and I ended up going with ECS because they know how to build fast cars and b.c they how they treat their customers right.. So far my experience has been nothing short of great and I couldn't be happier.. Ive ran into issues with other tuners so I was almost expecting all the great things I heard to be an overstatement but they're not.. Everything you hear about ECS is the truth, I couldn't say it enough..
02-12-2008, 08:21 PM
#15
Teching In
Join Date: Feb 2008
Location: long Island, N.Y.
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Top shop,maybe the best customer service.My 04ZO6 ECS installed Novi 2000 meth injection,AR headers,x-pipe,hi-flows,tex 0700 clutch 581rwhp 488rwtq. Running 8 psi at a safe tune on a stock motor.These guys created the paxton for them with there own brackets etc.
02-12-2008, 08:26 PM
#16
TECH Enthusiast
Join Date: May 2007
Posts: 538
Likes: 0
Received 0 Likes
on
0 Posts
Did you over Toqrue the flywheel bolts ? If you did That would make it leak.
I took my engine to them to be built and had them tune the car. installed the engine myself. rear main leak like crazy from the get go. They wouldnt even give me a seal leat alone replace it even though they installed the damn seal. Tune wasn't exactly the best in the world, but ok i guess. they are a tad pricey. Took the car to TTPerformance up in north jersey after i put a smaller pully on and they retuned it perfect. While i was at TTP I got a chance to see a bunch of their work and talk with the guys there. Top notch work and very noligable guys. I would strongly recomend them as another option.
02-14-2008, 12:34 PM
#18
TECH Enthusiast
Join Date: Apr 2005
Location: Somewhere Between Mild Insanity and Complete Psychosis
Posts: 565
Likes: 0
Received 0 Likes
on
0 Posts
Great shop, especially when it comes to their design.
Their ProCharger and Paxton Blower brackets and components make ProCharger and Vortech's stuff look like crap.
Their ProCharger and Paxton Blower brackets and components make ProCharger and Vortech's stuff look like crap.
