Cam spec opinions...
02-13-2008, 01:07 PM
#1
Teching In
Thread Starter
Join Date: Sep 2007
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Cam spec opinions... A guy on another board i belong to is selling a flowtech custom grind cam that he never installed in his motor. The specs on it are 232/236 .600 .600 112+3 .... right now he is selling it for 300 shipped which is a bitchin deal if you ask me... however, the cam was designed for a forged 402 he was putting in a trailblazer. I am wondering how it will run in my LS1... it seems to be a pretty medium sized cam and i figure it should do ok for me...
The only other major cam contender that I am considering right now is the MTI X1 ....
I plan on pairing either of the cams with the PRC stage 2.5 5.3 heads. I have not heard back from flowtech yet about what they think, but ive searched some graphs of similar cams and it seems to be a pretty strong runner.
The only other major cam contender that I am considering right now is the MTI X1 ....
I plan on pairing either of the cams with the PRC stage 2.5 5.3 heads. I have not heard back from flowtech yet about what they think, but ive searched some graphs of similar cams and it seems to be a pretty strong runner.
02-13-2008, 01:17 PM
#2
TECH Junkie
iTrader: (2)
Join Date: Jan 2006
Location: Fort Wayne, IN
Posts: 3,776
Likes: 0
Received 0 Likes
on
0 Posts
A guy on another board i belong to is selling a flowtech custom grind cam that he never installed in his motor. The specs on it are 232/236 .600 .600 112+3 .... right now he is selling it for 300 shipped which is a bitchin deal if you ask me... however, the cam was designed for a forged 402 he was putting in a trailblazer. I am wondering how it will run in my LS1... it seems to be a pretty medium sized cam and i figure it should do ok for me...
The only other major cam contender that I am considering right now is the MTI X1 ....
I plan on pairing either of the cams with the PRC stage 2.5 5.3 heads. I have not heard back from flowtech yet about what they think, but ive searched some graphs of similar cams and it seems to be a pretty strong runner.
The only other major cam contender that I am considering right now is the MTI X1 ....
I plan on pairing either of the cams with the PRC stage 2.5 5.3 heads. I have not heard back from flowtech yet about what they think, but ive searched some graphs of similar cams and it seems to be a pretty strong runner.
02-13-2008, 01:20 PM
#3
Teching In
Thread Starter
Join Date: Sep 2007
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Buy it man. This is one of the best profiles IMO you can use in stock/modded LS1 motor! You can't go wrong with it. This cam matched with the heads you want to get, 10.90's is obtainable, I know from experience and use a camshafts similar to that alot, it will be a proven winner for you.
02-13-2008, 01:41 PM
#5
Teching In
Thread Starter
Join Date: Sep 2007
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Ed Kurtis over there @Flowtech is a very smart guy, so you can't go wrong. I know already from experience with that cam, it ROCKS! 
