TTPMatt

iTrader: (18)

THESE BARS WILL BE SHIPPING UNPAINTED BY FEBRUARY 25th AND POWDER COATED BY FEBRUARY 27ND.

PICS !!!

Nope no need to remove the seats, to install it would be easier to remove the bottom seats. We will include a full set of directions on our website and with the harness bar so you can always have them.

We liked the appeal of putting the rear seat back in for good looks, but yes there will be no upper seatbelt or lapbelt mount.

The crotch strap bracket will be completed over the weekend, you will have full functionality of your seat. We are taking orders now for shipment late next week.





** End caps will be flat, not open tube as shown in picture on all production models.





** Seat all the way back and reclined a good way back

We will have pics of the powder coated version on Monday.

--------------------------------------------------------------------------

Introductory Sale. Good for all orders until March 15th, 2008. We will include the $75 4130 Chromemoly Tubing Upgrade for FREE!!! I apologize for the mess on our website but we will be working for the entire online catalog to be up by the end of February.

TTP Harness Bar Base Kit

All Round Tubing 1 3/4" Mild Steel (.120" Thickness)
- 1x TTP Harness Main Bar Hoop (Includes mounting plates for rear seat belt mount)
- 2x TTP Harness Bar Legs (Includes mounting hardware/gussets for bolt-in installation)
- 1/8" Thick Steel Plate for Main Bar Hoop Mounting.
- Includes mounting points for Both Driver & Passenger.
- Includes Crotch Strap Bracket for 5th Point Harness Mount Both Driver & Passenger.
- All associated hardware is included.

For the GROUP PURCHASE WE ARE GOING TO INCLUDE THE 4130 CHROMEMOLY OPTION FOR NO CHARGE. $75 VALUE!!!

TTP Harness Bar Order Page

OR

Give us a call at 973 365 2270.

SnakeStomper

iTrader: (8)

Any idea on shipping? My buddy and I are interested, zip 95119

TTPMatt

iTrader: (18)

Looks to be about $34 and change to get it down there. All the shipping charges are included through the shopping cart, you can get to the estimated shipping after signing up but before actually processing your card.

Beaflag VonRathburg

iTrader: (176)

I really like the looks of this and I was looking for something similar for my 93. Lets say I wanted to update down the line to a 8 / 10 point cage could I use this as the basis for that?

TTPMatt

iTrader: (18)

This would not work for an update down the line unfortunately. It is mimicked off of where a normal legal crossbar in the main hoop would go, but the mounting points and design of the bar will not allow for updates to NHRA/IHRA legal bars.

- Matt

Beaflag VonRathburg

iTrader: (176)

Hmm.. I might still be picking one up. How much do they weigh?

94blownz281

iTrader: (12)

Good question... the weight of the bar and removing the seats i wonder if it would equal out?

Beaflag VonRathburg

iTrader: (176)

That's what I was thinking. I'm hoping it's really close or that it weighs less than the seats.

EDIT: Does till the 29th include the 29th? I get paid on that day.

TTPMatt

iTrader: (18)

Beaflag: I never want to beat anyone up. If you need until March 1,2 ,3 that's fine. same goes with anyone I'll probably extend this to mid-March had a big interest with local guys already.

I will get the final weight on the bar by tomorrow when we finish our first production unit in black powder coat for a local guy.

BLWNLT1_T/A

iTrader: (12)

good to hear your willing to work with us guys that are a little tight on money

Mike00ss

iTrader: (9)

Looks really nice Matt, Is there any chance you could post up some pics when the bar is done of course, How the harness will look with Camaro seats? Since all the pics I keep finding are Firebird seats.
Thanks
Mike

will69camaro

iTrader: (19)

I saw you do custom powder coating. Is that limited to the colors listed or could you do Hugger Orange?

Thanks,
William

TTPMatt

iTrader: (18)

We are working right now on building our blast cabinet, was a little behind because of damaged parts in shipping. We are trying to get this powder coated by the end of the week. I have changed the dates on this sale to accommodate for our delay.

I can't get a GM color, but if you want a close color to hugger orange I can try. Let me go through my list of colors here and see what I can get a sample of.

We will show the harness bar in a Camaro and a Firebird so everyone can see how it fits. We are also working right now on downsizing the tubing a bit to save on costs and make it still effective. We'd like to offer these bars exclusively in 4130 for a budget price and forgot about M/S!!

94blownz281

iTrader: (12)

What does M/S mean

SnakeStomper

iTrader: (8)

M/S = mild steel ... which is heavier

94blownz281

iTrader: (12)

Okay thanks man

will69camaro

iTrader: (19)

Definitely keep me/us in the loop as I'm looking to buy a bar soon! I have started doing a lot of road racing recently and no one seems to offer a reasonable solution to the harness situation in fbodies. I'd run a cage but in a street car it's not something I want so this fits in that category perfectly

Thanks,
William

SnakeStomper

iTrader: (8)

Can't wait to see the final setup

QUASAR

iTrader: (6)

Any finished product pics?

Thanks

TTPMatt

iTrader: (18)

Sorry guys we are just finishing our new p/c oven here. We should have some final powder coated pics tomorrow.

- Matt