Nitrous Oxide Installation | Tuning | Products
Sponsored by:
Sponsored by:

Can I safely do this? (fuel requirements)

Thread Tools
 
Search this Thread
 
Old 07-16-2003, 12:35 PM
  #1  
11 Second Club
Thread Starter
iTrader: (13)
 
gomer's Avatar
 
Join Date: Jun 2002
Location: The Confederacy
Posts: 3,063
Likes: 0
Received 0 Likes on 0 Posts

Default Can I safely do this? (fuel requirements)

I am switching my TR220 cam out for a 230/230 112lsa. I know that after doing that I won't have enough injector to run a 100hp dry kit on my car, but if I go to a TNT F1 wet kit, will I be safe? Or will I have to upgrade my pump? I will always run 100 octane in the car. Which pump would be best if I have to upgrade?
Old 07-16-2003, 12:58 PM
  #2  
TECH Fanatic
iTrader: (2)
 
jhelms's Avatar
 
Join Date: Nov 2001
Location: Columbus, GA
Posts: 1,805
Likes: 0
Received 0 Likes on 0 Posts

Default Re: Can I safely do this? (fuel requirements)

I am switching my TR220 cam out for a 230/230 112lsa. I know that after doing that I won't have enough injector to run a 100hp dry kit on my car, but if I go to a TNT F1 wet kit, will I be safe? Or will I have to upgrade my pump? I will always run 100 octane in the car. Which pump would be best if I have to upgrade?

I went with the Walbro 340m in tank pump and upgraded to the 98 stock LS1 injectors when I ran my TNT wet kit. 150 shot was fine at this level, took the car to 10's @ high 120's with a lazy launch...




All times are GMT -5. The time now is 08:50 AM.