Finally done, Updated with a video, and some pics.
#1
11 Second Club
Thread Starter
iTrader: (19)
Join Date: May 2006
Location: Whidbey Island, Wa.
Posts: 965
Likes: 0
Received 0 Likes
on
0 Posts
Finally done, Updated with a video, and some pics.
Well after trials and trebulation, I finally got the car fired up today around 5:30....
Last night around 10 after the inlaws left, I went back out to work on it, when I probibly shouldn't of. I was trying to put the bolt in the oil pan and the string came off, and plop.... the bolt goes in to the oil pan. Well I called it a night after about 30 minutes of cussin.
Went to Autozone the next morning picked up a magnet, came home, and had it out within a couple seconds. Then after I successfully got the oil pump all the way on I started on the valve springs...
Did two full sets, and on the 3rd, ping... one of the retaining nuts went awol... Well after finding out TSP didn't send any like requested, I called around and found the dealership had only eight in stock, so I bought them all, just incase. lol.
After the valves springs were done around 2:30, every thing went like a charm.
I have a video and a whole bunch of pics. But I need to run to walmart and get a cable for the camera. And then I will post up the goods...
Car sounds amazing, idles at 650 right now, hopefully ellis will be availible tomorrow, cause I am coming over. lol.
The job was not as hard as I thought it was, but damn my back and neck are killing me. lol. It was a big help to have my buddy there as well.
Lane
http://s96.photobucket.com/albums/l1...tupCamonly.flv
Last night around 10 after the inlaws left, I went back out to work on it, when I probibly shouldn't of. I was trying to put the bolt in the oil pan and the string came off, and plop.... the bolt goes in to the oil pan. Well I called it a night after about 30 minutes of cussin.
Went to Autozone the next morning picked up a magnet, came home, and had it out within a couple seconds. Then after I successfully got the oil pump all the way on I started on the valve springs...
Did two full sets, and on the 3rd, ping... one of the retaining nuts went awol... Well after finding out TSP didn't send any like requested, I called around and found the dealership had only eight in stock, so I bought them all, just incase. lol.
After the valves springs were done around 2:30, every thing went like a charm.
I have a video and a whole bunch of pics. But I need to run to walmart and get a cable for the camera. And then I will post up the goods...
Car sounds amazing, idles at 650 right now, hopefully ellis will be availible tomorrow, cause I am coming over. lol.
The job was not as hard as I thought it was, but damn my back and neck are killing me. lol. It was a big help to have my buddy there as well.
Lane
http://s96.photobucket.com/albums/l1...tupCamonly.flv
Last edited by crazylane; 02-23-2008 at 12:39 AM.
#2
11 Second Club
Thread Starter
iTrader: (19)
Join Date: May 2006
Location: Whidbey Island, Wa.
Posts: 965
Likes: 0
Received 0 Likes
on
0 Posts
Wow, I guess since my screen name doesn't say WAHUSKER, or Crisisman, or TwoFast4lv, or Robert56, It doesn't count in here.
Next time I will just keep my work to my self.... and not let you guys know.
Next time I will just keep my work to my self.... and not let you guys know.
#4
11 Second Club
iTrader: (4)
Join Date: Nov 2001
Location: Woodinville, WA
Posts: 787
Likes: 0
Received 0 Likes
on
0 Posts
Well after trials and trebulation, I finally got the car fired up today around 5:30....
Last night around 10 after the inlaws left, I went back out to work on it, when I probibly shouldn't of. I was trying to put the bolt in the oil pan and the string came off, and plop.... the bolt goes in to the oil pan. Well I called it a night after about 30 minutes of cussin.
Went to Autozone the next morning picked up a magnet, came home, and had it out within a couple seconds. Then after I successfully got the oil pump all the way on I started on the valve springs...
Did two full sets, and on the 3rd, ping... one of the retaining nuts went awol... Well after finding out TSP didn't send any like requested, I called around and found the dealership had only eight in stock, so I bought them all, just incase. lol.
After the valves springs were done around 2:30, every thing went like a charm.
I have a video and a whole bunch of pics. But I need to run to walmart and get a cable for the camera. And then I will post up the goods...
Car sounds amazing, idles at 650 right now, hopefully ellis will be availible tomorrow, cause I am coming over. lol.
The job was not as hard as I thought it was, but damn my back and neck are killing me. lol. It was a big help to have my buddy there as well.
Lane
http://s96.photobucket.com/albums/l1...tupCamonly.flv
Last night around 10 after the inlaws left, I went back out to work on it, when I probibly shouldn't of. I was trying to put the bolt in the oil pan and the string came off, and plop.... the bolt goes in to the oil pan. Well I called it a night after about 30 minutes of cussin.
Went to Autozone the next morning picked up a magnet, came home, and had it out within a couple seconds. Then after I successfully got the oil pump all the way on I started on the valve springs...
Did two full sets, and on the 3rd, ping... one of the retaining nuts went awol... Well after finding out TSP didn't send any like requested, I called around and found the dealership had only eight in stock, so I bought them all, just incase. lol.
After the valves springs were done around 2:30, every thing went like a charm.
I have a video and a whole bunch of pics. But I need to run to walmart and get a cable for the camera. And then I will post up the goods...
Car sounds amazing, idles at 650 right now, hopefully ellis will be availible tomorrow, cause I am coming over. lol.
The job was not as hard as I thought it was, but damn my back and neck are killing me. lol. It was a big help to have my buddy there as well.
Lane
http://s96.photobucket.com/albums/l1...tupCamonly.flv
You going to make it out to some CCC events this year?
#5
Launching!
iTrader: (1)
Join Date: Dec 2005
Location: Whidbey Island, WA
Posts: 293
Likes: 0
Received 0 Likes
on
0 Posts
Here...we'll pretend your one of them and I'm one of the other regulars here.
Great job! Looks great! Should run 9s!!! You'll put a few pesky Fords in their place with that! Sounds awesome!
So on and so forth.
But seriously, good job, Lane. Now give me back my extension cord.
Great job! Looks great! Should run 9s!!! You'll put a few pesky Fords in their place with that! Sounds awesome!
So on and so forth.
But seriously, good job, Lane. Now give me back my extension cord.
#7
11 Second Club
iTrader: (3)
Damn that sounds good... Nice work dude!
I've been looking at that cam for awhile now, I think Doug and Sideways have close to the same cam. Cant wait to see your car run down the track, I may just have to hook the juice back up now! That cam should put you into the 11's
Only thing I have planned for this year is SS3600 with transmission by Speed Secrets, underdrive pulley and electric waterpump.
I might be selling some ET streets mounted on ZR1's if your in need.............
I've been looking at that cam for awhile now, I think Doug and Sideways have close to the same cam. Cant wait to see your car run down the track, I may just have to hook the juice back up now! That cam should put you into the 11's
Only thing I have planned for this year is SS3600 with transmission by Speed Secrets, underdrive pulley and electric waterpump.
I might be selling some ET streets mounted on ZR1's if your in need.............
Trending Topics
#9
10 Second Club
iTrader: (8)
Looks good Lane!
Sorry I have been working my *** off. I got up at 8am and started tearing into a 05 GTO and have been hard at it since.
We worked on another Z28 till 12 last night.
Again sorry for not repling in time man I have been slammed and not spending time here
BTW Pick up the pnone next time I have that stuff in stock for free
When you coming by?
See you then!
Sorry I have been working my *** off. I got up at 8am and started tearing into a 05 GTO and have been hard at it since.
We worked on another Z28 till 12 last night.
Again sorry for not repling in time man I have been slammed and not spending time here
BTW Pick up the pnone next time I have that stuff in stock for free
When you coming by?
See you then!
Last edited by TwoFast4Lv; 02-23-2008 at 03:13 PM.
#12
11 Second Club
Thread Starter
iTrader: (19)
Join Date: May 2006
Location: Whidbey Island, Wa.
Posts: 965
Likes: 0
Received 0 Likes
on
0 Posts
Ha ha, pretty funny guys...
NVME-What extension cord??? I dunno what your talking about. lol
Man some of you can't take a joke wortha ****!!!!
Tell TOM to go away. lol
NVME-What extension cord??? I dunno what your talking about. lol
Man some of you can't take a joke wortha ****!!!!
Tell TOM to go away. lol