dshag

iTrader: (1)

I had a some wheel hop for the first time yesterday when i got down on it and was wondering what parts would MOST help this to not happen.

LT1_Fireman

iTrader: (12)

Rear lower control arms and relocation brackets . Check out UMIperformance.

dshag

iTrader: (1)

any reccomendations on what to get i want strength and light weight. i dont plan on lowering the car but you never know. i was leaning towards the double adjustable chrome moly version is it worht the extra $ its like 100 more then the non adjustable regular version

cookba

iTrader: (10)

i have the DA ones and its a rough ride on bumpy roads. i dont have the relocation brackets but i'll get them once i get my Koni 4/4's and Strano springs

LT1_Fireman

iTrader: (12)

DA here and I think its worth it just to center the wheels up because they are almost half an inch out from the factory.

omcar

iTrader: (10)

Lower control arms corrected mine.

davered00ss

iTrader: (4)

I would suggest shocks.

transamws6_97

iTrader: (5)

shocks, relocation brakcet, lca in that order

Viper

iTrader: (6)

Well for me it took a Random Tech torque arm to get rid of the axle hop; after shocks, lca's and rl brackets.

FiredUpZ28

If your not lowered and never intend to lower - go with non adjustable LCAs. Rod ends are rough. You really don't need relocation brackets at stock ride height. I agree with the shocks, T/A, and T/A relocate kit too.

dshag

iTrader: (1)

thanks for the advice hopefully ill buy my lca's and panhard tomorrow