LS? 408 for my 95 Z28
03-02-2008, 08:34 PM
#1
Teching In
Thread Starter
Join Date: Nov 2007
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
LS? 408 for my 95 Z28 I want to put built LS (600hp NA) in place of the LT1 in my 95 Z28.
For the conversion, would I be better off getting a complete donor LS engine & transmission with all the trim
OR
Starting from the ground up and buying the parts separately?
For the conversion, would I be better off getting a complete donor LS engine & transmission with all the trim
OR
Starting from the ground up and buying the parts separately?
Last edited by elc339; 03-02-2008 at 10:27 PM.
03-03-2008, 12:36 PM
#2
Launching!
iTrader: (2)
Join Date: Nov 2004
Location: Humble, Texas
Posts: 296
Likes: 0
Received 0 Likes
on
0 Posts
It depends on how much of that stock motor you will use with a pull out. You will get dimed and nickeled to death on the accessories though if you go from scratch. You will also need an LS1 engine cradle.
03-04-2008, 01:53 AM
#3
Teching In
Thread Starter
Join Date: Nov 2007
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Yeah that is what I have been reading on threads I have searched related to the subject. There are lots of LT1 to LS1 threads but only a couple on subject with any detail. I will just keep digging and see what I am in for. I don't need to have the conversion done until next summer so I got a little time.
