Oil catch can mounting point? > Need a picture
#1
TECH Fanatic
Thread Starter
Oil catch can mounting point? > Need a picture
I am still getting some oil in my intake and TB. I am going to install a catch can. I did a search, but did not find any pics as to the best place to mount the catch can.
The engine is using no more than a 1/4 qt at 4,000 miles, but the very little oil it is using is obviously going through the PCV system. I just don't want any carbon buildup on the pistons or intake valves.
Could someone please post a pic or two as to where you mounted the can.
Much Thanks,
Ron
The engine is using no more than a 1/4 qt at 4,000 miles, but the very little oil it is using is obviously going through the PCV system. I just don't want any carbon buildup on the pistons or intake valves.
Could someone please post a pic or two as to where you mounted the can.
Much Thanks,
Ron
#5
TECH Fanatic
Thread Starter
Re: Oil catch can mounting point? > Need a picture
Not complaining at all. However, when I look into the TB, its wet with oil. Just want to have a dry intake tract.