lt170chevelle

iTrader: (2)

I know there are alotta lt1 owners with Tuner Cat including myself on here. Is there a bin dump or place in here where we can exchange modded and stock files? I think this would be very useful for allotta tuners on here. If there isnt one can someone get something like this started? Also how to post a bin file on here would be helpfull too.


here is a link to a stock tune for a 94 a4 camaro

monodax.com/forums/tunercat-files/1097-i-need-94-z28-a4-stock-file

moehorsepower

iTrader: (3)

Yes there is a site that had from stock A4 & M6 files to modded files, I will try to find it again and post it unless someone knows what I am talking about...

C_Rules

iTrader: (7)

the site you have there (monodax) has a place for that. the only problem is not too many people post there. best thing to do is just ask questions and modify your file little by little.

Taubr Unit

iTrader: (32)

I have a tune for a '94z a4 with a gm847 cam, stall, 3.73 gear and 6600 shift points etc.

infinitebird

iTrader: (11)

I believe this was the site you were referring to: http://www.bfranker.badz28.com/LT1Edit/LT1files.htm

The files are .lt1 files (from lt1edit) but you can open those with TC as well.

Formula350

iTrader: (3)

I usually use here to find bins or all sorts
http://www.diy-efi.org/

This is more of a direct link
ftp://ftp.diy-efi.org/pub/gmecm/

It also has modified one by people. And how you search the BIN category list is by your ECM code. I'd just take the last 3 sigits, CTRL+F and search fro them.

Smokinlt1

What's up with TunerCat? I downloaded their free evaluation program and when I try to run the $EE bin file it keeps asking me for a password. Anyone else have this problem? I had TC on my old laptop but it crashed so I got a new laptop with Vista. Could that be the problem?


Sorry about the hijack.

bobdec

The " Tuner " eval program is free for 30 days, the $EE is not, cost $19.95 for the PW to unzip the $EE file.

lt170chevelle

iTrader: (2)

Yeah the definition file must be purchased to read the pcm

ZeeTwentyFate

iTrader: (19)

you have to run TC in compatibility mode on Vista

lt170chevelle

iTrader: (2)

anyone else have any places or bin files to share?

954mula

Yea I had to run it in comp mode for Win2K as XP mode still wouldn't load.