kratos2250

Just ordered a yank ss3200 with the tourquer v.2 camshaft for my 02 camaro. I think this will be a bad *** setup, what do you guys think? Looking to get 400rwhp

SOMbitch

iTrader: (8)

Personally, I would have gone 3600 with that cam.

jlrz28

iTrader: (7)

If you would have gone with a vig3200 you would have a 3600

RedRallyeZ

iTrader: (20)

i really dont know about getting 400rwhp out of that cam through an auto. dont get me wrong i love that cam, but remember that you have more parasitic loss with an a4, just dont base success on RWHP numbers. youll have a nice fat torque curve with a ton of fun to drive, but probably wont hit that 400 mark

2000Hawk

iTrader: (5)

^ What he said, i don't think you'll be able to hit 400rwhp. But one things for sure is that your car is going to have a pretty kick *** E.T.
-Joel

Funkster

iTrader: (97)

You will probably sixty foot like a crazy bastard but look for around 380-390 depending on supporting mods.

socmguy

iTrader: (18)

I would have went for a little bigger stall too but then again, I don't know what gears you have. You'll definitely be happy with that Yank tho!

black01_WS6

iTrader: (13)

I would of gone with a 4000 stall. The stall may be a bit on the small side for that cam.

like said above what gears do you have in there?

COD02SS

Agreed with the stall being too small

Kingc8r

iTrader: (21)

I want to go 4000 but I need to drive someones car first. I'm used to manuals as this is my first auto. From what I've read and researched the stall you picked may be a tad too small

theinstag8r

iTrader: (3)

at least a 3600 stall....horsepower with the auto on the dyno around 360-370 unlocked. BUT it will be a bear at the track