Buckndol

I have an LS 1 from a GTO. I removed the GTO pan and replaced it with an F-body oil pan. I believe the GTO dipstick went into the pan. I have a hole in the block where the dipstick for an f-body should go (I think). It is plugged with what looks like a small softplug. Do I just punch it out and insert the dipstick tube? Should I push it on through or back out from the bottom?

67rsss

iTrader: (4)

Punch out the plug. You will need an LS1 dipstick. An OEM (I happen to have one handy) or the Lokar (which is pretty nice).

Buckndol

I have the f-body dipstick and tube. I just wanted to make sure before I punched the plug out. Thanks again.

ls1nova71

iTrader: (4)

I would punch it out from the bottom, you already have the pan off anyway.