Southern Members - Electric Cutout Installed

I finally got around to installing this fun little thing..:devil:

I bought it off of Summit, it's made by QTP.
http://i103.photobucket.com/albums/m129/the_merv/CUTOUT.jpg

I installed it on where I had my Manual Cutout Plate bolted to, and ran the Wires under the Carpet where the Back Seats were..
http://i103.photobucket.com/albums/m129/the_merv/CUTOUT2.jpg

I wired it into the Cigarette Lighter Wiring and made a custom Panel out of Aluminum to put the Swtiches on. I had to put in an in-line Switch cause the Lighter Circuit is constant power and the Switch for the Cutout has a little light in it, that and I wanted to be ablwe to control power to the whole setup.
I placed it where the Cigarette Lighter Assembly originally was..
http://i103.photobucket.com/albums/m129/the_merv/CUTOUT3.jpg

Now I can make all kinds of noise..:D

I need to get one, instead of leaving the cutout open 24/7. lol. Does the electric portion hang below the cutout pipe any? I'm worried about it dragging on the ground

Does the electric portion hang below the cutout pipe any? I'm worried about it dragging on the ground

Depends on how you place it..I tied the Wires up.

louder is always better :D

man that is cool. i get soooo many ideas from u guys..and gals