Trying something a little different
03-23-2008, 07:22 PM
#1
TECH Apprentice
Thread Starter
iTrader: (15)
Join Date: Aug 2007
Location: Rougemont, NC
Posts: 387
Likes: 0
Received 0 Likes
on
0 Posts
Trying something a little different This is a little different setup than most people go with, so I figured I would ask your opinions. First off my car is a 98 auto, and it will probably never see track time. I just want a reliable streetable car with a little edge.
I already have some stage 3 cnc ported 243 heads. Im thinking about running them with a ls6 cam + bolt ons without a stall. Do you think its possible to reach 380 rwhp with this combo through an auto?
I figure if I ran the 243 heads with a larger good cam I will have to have at least a 3600 stall. I might make a little more power this way but not much more because of the stall. Since my car wont see track time and because I want to keep it real streetable I dont really want to go with a stall. What do you guys think?
I already have some stage 3 cnc ported 243 heads. Im thinking about running them with a ls6 cam + bolt ons without a stall. Do you think its possible to reach 380 rwhp with this combo through an auto?
I figure if I ran the 243 heads with a larger good cam I will have to have at least a 3600 stall. I might make a little more power this way but not much more because of the stall. Since my car wont see track time and because I want to keep it real streetable I dont really want to go with a stall. What do you guys think?
