AP-Engineering

Here it is guy's, for those of you who were calling and emailing me about 6.0 liter pistons. Here is what I have as of right now and there will be more coming.

#11510
4.030 bore
3.622 stroke
6.098 rod
1.340 c/d
.945 wrist pins
-2cc valve reliefs

#11511
4.060 bore
3.622 stroke
6.098 rod
1.340 c/d
.945 wrist pins
-2cc valve reliefs

#11512
4.030 bore
3.622 stroke
6.125 rod
1.315 c/d
.927 wrist pins
-2cc valve reliefs

#11513
4.060 bore
3.622 stroke
6.125 rod
1.315 c/d
.927 wrist pins
-2cc valve reliefs

#11514
4.000 bore
3.622 stroke
6.098 rod
1.336 c/d
.945 wrist pins
-13.7 cc dish

#11515
4.030 bore
3.622 stroke
6.098 rod
1.336 c/d
.945 wrist pins
-14.9cc dish

#11516
4.000 bore
3.622 stroke
6.125 rod
1.309 c/d
.927 wrist pin
-13.7cc dish

#11517
4.030 bore
3.622 stroke
6.125 rod
1.309 c/d
.927 wrist pins
-14.9cc dish

#11518
4.000 bore
4.000 stroke
6.125 rod
1.125 c/d
.927 wrist pins
-2cc valve reliefs

#11519
4.030 bore
4.000 stroke
6.125 rod
1.125 c/d
.927 wrist pins
-2cc valve reliefs

#11520
4.000 bore
4.000 stroke
6.125 rod
1.125 c/d
.927 wrist pins
-15cc dish

#11521
4.030 bore
4.000 stroke
6.125 rod
1.125 c/d
.927 wrist pins
-15cc dish

If you guy's have any other questions call or email me with them.

Thanks,
Chris Gelineau
Diamond Pistons
877-552-2112 toll free

Vents

iTrader: (9)

Looking great as always Chris, how about something like this:

4.030 bore
3.622 stroke
6.125 rod
1.125 c/d
.927 wrist pins
+12cc Dome

ls1290

iTrader: (20)

What does a set cost, how much lift does the -2cc valve reliefs with a 0.40" milled heads allow, and how much nitrous can they handle?