100% stock 13.0 @ 110 HELP
03-31-2008, 05:40 PM
#1
100% stock 13.0 @ 110 HELP I took my baby down darlington 1/4 last wednesday! i ran 13.016 @ 110 two times with a 2.1 60' and a 13.0XX @ 109 once and a 2.2 in the 60' on street tires... the car is 100% stock with the exhaust cut off after the back tires and eibach spring a spec stage 3 clutch and the trans upgrade from tick performance in NC! the motor is untouched still stock air box and everything!!! i need to get in the 12's without breaking my rearend!!! NEED HELP!! any advice is good
03-31-2008, 05:58 PM
#3
oooops yeah thats what i ment!!! haha being i said mods after that i hope yall understand what i ment!lol i got a 8.5 at 86 in the 8th was my best!!! Any good mods for traction but not breakin my rear??? the car is lowerd so i know i should put lower control arm relocation brackets but just havent got around to it... is this mod worth it???
04-01-2008, 10:15 AM
#5
Yeah, some weight reduction will get you 12s if you're already running a 13.0. And cutting the exhaust off plus having a few other mods doesn't equal stock. Technically you have done a power adding mod by creating a sort of cutout, although you haven't touched the engine.
Regardless, that's a very nice time and trap speed. Congrats.
Regardless, that's a very nice time and trap speed. Congrats.
Trending Topics
04-08-2008, 09:08 PM
#13
12 Second Club
iTrader: (14)
Join Date: Sep 2005
Location: ILLINOIS
Posts: 1,193
Likes: 0
Received 0 Likes
on
0 Posts
Yah I consider stock the way it came from the dealership brand new. Im sick of these posts were people say there stock and there not. Either way nice numbers for those mods.
04-09-2008, 07:41 PM
#14
Staging Lane
iTrader: (3)
Join Date: Apr 2008
Location: the hood, illinois
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
i dont really know much about weight reduction but you could do headers x pipe and mufflers for dumps that way it would save some weight without the exhaust all the way to the back and the headers would give some power try intake to or a lid
02-23-2009, 10:22 AM
#17
Ok. Slp loud mouth exhaust and lid, a set of LCA's and Some nitto 555' with a richmond 410 gear and this weekend the car ran.... a 7.90 @ 92 MPH and a 12.5 @ 114 MPH 
not to bad if i say so my self! 
lookin to put a wet kit on it and shoot for the 11's
not to bad if i say so my self! lookin to put a wet kit on it and shoot for the 11's 
02-26-2009, 07:35 PM
#20
If you are a good driver its possible. My stock best was 8.40 with a lid but the entire exhaust was stock. That was on some Hankook non high performance tires.
My run was during the summer. Never got the chance to try it out stock with cool weather.
My run was during the summer. Never got the chance to try it out stock with cool weather.