droptopT/A

iTrader: (19)

ok im in the middle of my cam swap right now but i cant get the lifters to go up im spining the cam but its really not doing anything i cannot put in the wooden dowel any advice on this or what do i do

Emoney97ss

iTrader: (42)

push them back down with a push rod, you should feel it hit the cam, then try spinning it again...

droptopT/A

iTrader: (19)

ok let me try im in my garage right now lol i brought my lap top out

6LITEREATER

iTrader: (56)

Use pen magnets. The type they sell at the counter of most autoparts stores. They are on a thin (pushrod diameter size) telescoping rod. They have "shirt hooks" (like a pen which is why they are called pen magnets) that you can use to stretch out to keep on the head and keep the lifters up...

flash12t

iTrader: (1)

if your using the metal robs i would just say wigggle it in but with the wooden rods i wouldnt recomend it. . you could use that pen magnet might help but the cam should push them up all the way .