View Full Version : Throttle body sizes side by side..


TLewis4095
04-09-2008, 12:39 PM
http://i262.photobucket.com/albums/ii115/RevXtreme1/105mmTBvs90mm.jpg

Stock on the left, the 90 in the middle & our latest, the 105 on the right....keep pets & small animals away. I'll post pics of the 110 & 115 soon.

GTFORMULA
04-09-2008, 12:43 PM
Is there enough material on the fast intake to port match to the 105mm ??

TLewis4095
04-09-2008, 03:18 PM
Is there enough material on the fast intake to port match to the 105mm ??

No. The largest we have opened up the FAST is the 95 (Ron at Vengence opens them as far as 100) but you can open the 92 FAST to 95 & still retain the O-ring.

The 105 & up should be used with the Beck sheetmetal intakes as they were designed specifically for the 105-115mm RevXtreme throttle bodies and have shown the best results. And the tune for the 100 & above needs to be a speed density tune. :thumb:

LTLRDSS
04-09-2008, 05:17 PM
how much and how long to port a stock tb

Caveman
04-09-2008, 11:20 PM
Got my RevXtreme 95mm from UPS today. Thanks :D

TLewis4095
04-10-2008, 06:32 AM
how much and how long to port a stock tb

$150, 2 day turnaround usually. :thumb:

TLewis4095
04-11-2008, 09:01 PM
And the 105 on the custom Beck intake:
http://i262.photobucket.com/albums/ii115/RevXtreme1/RevX105onBeck3.jpg
http://i262.photobucket.com/albums/ii115/RevXtreme1/RevX105onBeck2.jpg

A joint project between RevXtreme & John Beck.....and the results are a work of art!

Beck makes this manifold to match our 105,110 & 115mm TB's.:cheers:

Steve68
04-12-2008, 08:40 AM
You sure Bin Ladens not hiding out in that cave!!!!!

Caveman
04-12-2008, 09:20 AM
Very nice looking combo!!

TLewis4095
04-12-2008, 09:48 AM
Got an annoying ricer buzzing around? Just come up on him & suck the wing right off him!:D