firefighter813x

iTrader: (6)

I broke the speed sensor on the tail end of the tranny (98 4L60E) when I was installing my torque converter. I didn't break the sensor that bolts into the tranny, but I broke the clip that snaps in. GM wants $94 bucks for that clip!!! Do I have any other option?

FLT

iTrader: (1)

All you need is the plug correct with the wires? $94 for a pig tail? I would check with another dealer.

firefighter813x

iTrader: (6)

Yes sir! The plug on the harness has two wires and off of memory I think one is yellow and one is purple?? I can't remember

FLT

iTrader: (1)

That does not cost $94. Tell them to look it up again or go to a different dealer. Might be able to get one from a junk yard.

wajouba

iTrader: (1)

If the speed sensor isn't plugged the 4L60e won't get a command to shift true?! because I have just drove my car today for the first time, its a 240sx with an LS1 conversion, and its Auto, but it won't shift to 2nd, but I had my speed sensor disconnected because its not reaching... am I right? or do I have another problem?!

Thanks, sorry for the Hijack

performabuilt

iTrader: (25)

No it will not shift or will shift very late without the speed sensor its a must

MUSTANGBRKR02

iTrader: (91)

try Steve at LSXTune should have these----->

MUSTANGBRKR02

iTrader: (91)

http://www.lsxtune.com/shop/product_...roducts_id/880

this the one?