CamaroGuy27

How many people out there are running the TSP 231/237 Cam. As a matter of fact, how many of you are DD this cam, and would you recommend it as a DD?

CamaroGuy27

anyone?

big reg

iTrader: (28)

I dd their 233/239 112 lsa cam. It is the replacement in their lineup for the 231/237 which was ground on Lunati lobes I believe. The 233/239 is on Comp XE-R lobes.

TXZ28LS1

iTrader: (5)

i was looking into that cam myself. but i went with MTI X1.. the 231/237 is a good street cam also. do some searches on speed inc si5. there should be alot of results with that cam.

Jason 98 TA

iTrader: (4)

The 231/237 camshaft was a good camshaft, but cams have advanced a little bit in the last few years. Our Torquer 3 camshaft will make more peak power & start making power much earlier than the old 231/237 camshaft. We don't even sell the 231/237 anymore because we've found so many other camshafts through engine dyno testing.

NVR_SPDS

iTrader: (39)

Our 00 has the 231/237 and its an ok cam.. Easy to DD, just takes a little getting used to going from stock cammed car. Not too impressed with the numbers.