View Full Version : cam and stall help


ls1power04
04-21-2008, 12:44 AM
I have a 2004 gto long tube headers,cold air intake, and a tune right now, looking to do a cam and stall next. Looking for help for best cam and stall to go with. And anyother mods to put me in the low 12sec quarter time.

FatZ28
04-21-2008, 02:14 AM
Are you wanting to keep some driveability with it?

omcar
04-21-2008, 12:25 PM
I have a vig 3,600 and 3.73s and run low 12s..I'm sure you could do the same with a 3,200 stall.

Detoxx03
04-21-2008, 02:30 PM
Get a cam from Futral Motorsports and a yank 3200

tylerdj
04-21-2008, 04:20 PM
Read through the stickies in the internal engine and automatic transmission section....

TXZ28LS1
04-21-2008, 04:38 PM
I have a 2004 gto long tube headers,cold air intake, and a tune right now, looking to do a cam and stall next. Looking for help for best cam and stall to go with. And anyother mods to put me in the low 12sec quarter time.



maybe with some sticky tires u might be able to be in the 12's. but go for atleast a 3200 stall/224 cam and u will definitely be in the mid 12's i think.

ls1power04
04-21-2008, 11:44 PM
Yea like too keep it some what driveability. Its mainly a weekend car i put roughly 5 to 7000 miles a year on it. And i have mickey thompson street ets on back right. I been looking at a 228/230 .588/.592 lsa112. Would my stock rear end hold a 3200 stall with street ets?

Detoxx03
04-21-2008, 11:55 PM
That 228/230 cam would be a great choice

SOMbitch
04-22-2008, 10:40 AM
That 228/230 cam would be a great choice

^^^^^That cam + Yank SS3600 + DR's = low 12's:chug:

FatZ28
04-23-2008, 03:21 PM
I'm not for sure how stout the rears are in the GTOS? Might go to the gto forum and find out.