98RedBird

iTrader: (77)

Quick question, do the bellhousing/tailhousing come with the Performabuilt transmissions or do I need to retain mine from the stocker before I send it off. I remember that one of the manufacturers send it as an entire unit and you don't need to bother with removing them but I thought that it was FLT. Just wanted to make sure before I sell mine!

Thanks,
Drew

John_D.

iTrader: (2)

You need to keep yours to swap over to the new one. Also the piece on the drivers side on the end of the shift rod.

performabuilt

iTrader: (25)

You will need to keep those. We do have the bells available at additional cost, However the FBODY tails are rare overall. And since we dont require a core return its very difficult to get those. Of course if you have relocated your torque arm we do have the regular tailhousings in abundance.

98RedBird

iTrader: (77)

Awesome, how much do your regular tails run? I did relocate my TA and would like to clean it up.

Thanks Frank I'm getting pretty excited about this new trans!
Drew

performabuilt

iTrader: (25)

The regular tail is free with the trans If you need a bell they are 100 dollars

98RedBird

iTrader: (77)

Is the seal already installed in the tail or will I need to pick a new one up?

performabuilt

iTrader: (25)

If we send with one its allready installed just when you pay out remind me of all of this ok

98RedBird

iTrader: (77)

No problem. Thanks.