Northwest Members - MSD Ignition, 160F Thermostats, Walbro pumps & More!

-MSD 6010 and MSD 8886:

The PN 6010 Ignition Controller is designed for GM Gen III engines that have been retro-fit with an intake manifold and carburetor. The Controller can also be used in stock, EFI applications, by using accessory Harness PN 8886. The factory coils or MSD Coil, PN 8245, must be used. The Controller is supplied with a wiring harness that connects to the factory connectors for a simple
installation.

This has almost no run time! It was on the car for a short period while working out my Accel-DFI install. Its a great system for running a stand alone ignition. It also includes the MSD-8886 kit so that it can be run in conjunction with the factory EFI system.

New cost was $325 + $70 But I'm selling it for $300 shipped
Instructions: http://www.msdignition.com/pdf/frm26894_6010.pdf

Picture:
http://rkarasek.com/images/FS/IMG_5721.JPG

http://rkarasek.com/images/FS/IMG_5726.JPG

Hypertech 160F Thermostat for LS-1/6s:

-New in the box 160F thermostat
$35 shipped (SOLD)

-Slightly used Hypertech Thermostat 160F
$25 shipped (SOLD)


-Walbro 255lph intank fuel pumps

Both pumps have less than 1000 miles one was the primary one was the boost pump

The Boost pump has less time on it $75 Shipped
The Primary pump (darker sock) $65 shipped

http://rkarasek.com/images/FS/IMG_5742.JPG

-Tires I have two brand new 205/55/ZR17s Sport Contact 2 tires. I was going to narrow a set of 17"s to run on the front, but decided not to. These are brand new and whould be perfect front runners for a big breakdrag car.

$130 shipped

http://rkarasek.com/images/FS/IMG_5732.JPG
http://rkarasek.com/images/FS/IMG_5731.JPG
http://rkarasek.com/images/FS/IMG_5733.JPG
http://rkarasek.com/images/FS/IMG_5734.JPG

-Also I have an inline oil filter setup for a Turbo charger, it goes between the oil sender for the turbo and the turbo. Its a 10 micron filter perfect for long turbo charger life.

$40 Shipped

http://rkarasek.com/images/FS/IMG_5725.JPG

-Crane Billet Bodied lifters:
Part number 144530-16 for LS1-6 engines. A great upgrade over stock

$120 shipped.

http://rkarasek.com/images/FS/crane%20lifters1.JPG

-Also, I have a set of ZR-1 wheels 17X9" and 17X11" Black with the polished lips. Pretty much brand new, the rears had tires mounted and removed, the fronts have never been out of the box. Also includes new lug nuts and stems.

$400 for the set (Local)
http://tomzwheels.com/catalog/images/5035-36b.jpg

I take paypal or cash

Paypal rkarasek@gmail.com

Thanks,
Ryan

:punch:damn i wish i wouldn't have bought that plane ticket home today. i could have those wheels:drive:

I got dibs on one of the thermostats....

OP, you've got pm

Also, I have a set of ZR-1 wheels 17X9" and 17X11" Black with the polished lips. Pretty much brand new, the rears had tires mounted and removed, the fronts have never been out of the box. Also includes new lug nuts and stems.

$400 for the set (Local)
http://tomzwheels.com/catalog/images/5035-36b.jpg


Thanks,
Ryan



I'm gonna kick Ryan (Ryan'sSS) in the shin if he dosn't pick up these wheels from you:devil:

I'll take one of the Termastats too. I will be In poulsbo this weekend.

OK, LS1>* gets the new one and Crazylane gets the used one, Cool?

I'll consider them sold...

Fine by me. Send me your Phone Number, that way when I get to poulsbo, I will give you a shout, for when I can come over and pick it up.

OK, LS1>* gets the new one and Crazylane gets the used one, Cool?

I'll consider them sold...


You've got pm....Paypal sent

Wheels, somebody needs wheels!

i am interested in them i ruined my last set... Can i have pics sent to evanelliott11385@yahoo.com

Wheels, somebody needs wheels!
This would make a great drag pack for my car, if the fronts can be narrowed. Was that what you were going to do? I have an extra set of Z06 wheels I was going to use, and narrow the front 17" if they could be done. However, the price of these wheels, I could sell the low mileage Z06 wheels, buy yours and get the tires and a set of new M/T Et Streets. lets talk, as I do have a local buyer for the Z06 wheels (second fastest vette on the list-Mark-can't rememeber his on line name, mc...?) if he still wants them.
Robert

Hey Ryan how does that unit compare to the Mallory 685. I have someone looking for an MSD unit to match the Malory unit, if yours will do the trick he can save money and you can sell it :)

I need wheels but all my money is going into the motor :P (and bills)

How much HP will those fuel pumps support?