PCM Diagnostics & Tuning HP Tuners | Holley | Diablo
Sponsored by:
Sponsored by:

Progressivly getting leaner???

Thread Tools
 
Search this Thread
 
Old 04-25-2008, 11:01 PM
  #1  
On The Tree
Thread Starter
iTrader: (14)
 
BRAKE's Avatar
 
Join Date: Mar 2005
Location: Cuyahoga Falls, Ohio
Posts: 126
Likes: 0
Received 0 Likes on 0 Posts

Default Progressivly getting leaner???

Ok I had my car tuned last July, and it would sit around 12.6-12.9 at WOT, since then I have added a ported TB, FTRA, and the fast toys ported MAF ends. The car was tuned on a de-screened maf btw. But I noticed last week that WOT a/f was about 13.3-13.5 and this week its about 14.3-14.5 . I changed both o2's, the drivers side one and the wideband one on the passenger side (since the wideband o2 was shot anyway) and I changed the fuel filter. After all of that I noticed no change in my a/f, its still mid 14's. Ive never heard of anything similar to this happening to anyone else. Anybody have any ideas????
Thanks in advance!
Old 04-25-2008, 11:12 PM
  #2  
TECH Veteran
iTrader: (1)
 
gametech's Avatar
 
Join Date: Sep 2004
Location: Stockbridge GA
Posts: 4,068
Likes: 0
Received 432 Likes on 307 Posts

Default

Slowly deteriorating lean conditions point to a fuel pressure problem. Check the fuel filter first. Beyond that diagnostics get a bit more complicated.
Old 04-25-2008, 11:26 PM
  #3  
TECH Senior Member
iTrader: (25)
 
2xLS1's Avatar
 
Join Date: Nov 2001
Location: Warr Acres, OK
Posts: 5,649
Likes: 0
Received 8 Likes on 8 Posts

Default

The ported MAF ends have uncalibrated the MAF. Put the stock ones back on it was tuned with and see if it richens back up.
Old 04-26-2008, 08:45 AM
  #4  
TECH Senior Member
iTrader: (3)
 
Old Geezer's Avatar
 
Join Date: Jun 2004
Location: GA, USA
Posts: 5,640
Received 70 Likes on 62 Posts

Default

And, when this happens, the Fp is??
Old 04-26-2008, 09:58 AM
  #5  
On The Tree
Thread Starter
iTrader: (14)
 
BRAKE's Avatar
 
Join Date: Mar 2005
Location: Cuyahoga Falls, Ohio
Posts: 126
Likes: 0
Received 0 Likes on 0 Posts

Default

I havent put a fp gauge on it yet. I didnt know if this could be pcm related or not.




All times are GMT -5. The time now is 08:03 PM.