Will it be safe to run new engine without a full tune?
#1
TECH Fanatic
Thread Starter
iTrader: (3)
Join Date: Sep 2002
Location: Chicago, Il
Posts: 1,049
Likes: 0
Received 0 Likes
on
0 Posts
Will it be safe to run new engine without a full tune?
I'm just finishing up my 422 with the following specs:
Stage III 6.0 heads with 2.10" int and 1.60" exh. valves
6.0 Block bored to 4.030"
Lunati 4.125" crank, 6.125" rods, 2.100" pistons
246/246 600/600 112LS
42# bosch injectors
My previous set up was:
Stage III 5.3 heads with 2.02" int and 1.60" exh
216/220 525/533 114LS
1.8 Crane rockers
Will my truck run well enough to get to the place that will be doing my tuning? Thanks for any help.
Stage III 6.0 heads with 2.10" int and 1.60" exh. valves
6.0 Block bored to 4.030"
Lunati 4.125" crank, 6.125" rods, 2.100" pistons
246/246 600/600 112LS
42# bosch injectors
My previous set up was:
Stage III 5.3 heads with 2.02" int and 1.60" exh
216/220 525/533 114LS
1.8 Crane rockers
Will my truck run well enough to get to the place that will be doing my tuning? Thanks for any help.