stock cam and lift question?
08-05-2003, 11:59 AM
#1
TECH Apprentice
Thread Starter
iTrader: (5)
Join Date: Aug 2003
Location: Cadillac, MI
Posts: 350
Likes: 0
Received 0 Likes
on
0 Posts
stock cam and lift question? here we go!! i measured the lift on the pushrod side and it came out to be exaust side #1 .295 #3 .300 #5 .295 #7 .250
now could this be a bad lifter or cam lobe on #7?
now could this be a bad lifter or cam lobe on #7?
08-05-2003, 12:22 PM
#2
On The Tree
Join Date: Jun 2003
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
Re: stock cam and lift question? I'd guess something is wrong there, bent pushrod, worn lobe, etc., worth investigating further. Does anyone know the specs on a stock LS1 cam? I've been wondering myself.
08-05-2003, 12:32 PM
#3
TECH Apprentice
Thread Starter
iTrader: (5)
Join Date: Aug 2003
Location: Cadillac, MI
Posts: 350
Likes: 0
Received 0 Likes
on
0 Posts
Re: stock cam and lift question? all the intake side were .270-.280. i have manley chromoly heat treated pushrods with less than 5k on them i also have REV 1116 dual coil springs stock rockers and lifters
