PRW info
05-06-2008, 11:32 AM
#3
On The Tree
iTrader: (14)
Join Date: Mar 2006
Location: Rochester, NY
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
I recently installed prw 1.7 alumminum roller rockers mine when i was buliding it. the rockers seem to be a good quaity and they fit with no grinding. i havn't run the car much because i'm waiting for a tune but the rockers seem great and were priced very good. i called prw and talked with them and they are a very good company to deal with and were very helpful. i'm very happy with the product.
05-06-2008, 08:31 PM
#4
On The Tree
iTrader: (14)
Join Date: Mar 2006
Location: Rochester, NY
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
i retract my previous statment. mike from new era flashed my car today so i could run it and get it ready for the dyno and the rockers were hitting the valve covers. wasn't a big deal i just took out the baffle on the right side and ground a few spots on the left. other than that i'm very happy with the rockers.
05-07-2008, 05:08 PM
#6
On The Tree
iTrader: (14)
Join Date: Mar 2006
Location: Rochester, NY
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
i saw the exact spots where they were hitting and just ground the valve cover a little. i did loose a little blue off the rockers but no harm done. it was an easy fix.
