Wiring Harness Auto ---> Stick
05-08-2008, 06:53 PM
#1
TECH Regular
Thread Starter
Join Date: May 2005
Location: Bay Area, CA
Posts: 406
Likes: 0
Received 0 Likes
on
0 Posts
Wiring Harness Auto ---> Stick Well, getting real itchy to install my cammed 2000 LS1/T56 combo in place of my 2001 Auto setup. What will I need to change or move around to use my existing harness that was made for the auto? Anyone have a simple break down? 
05-09-2008, 03:35 PM
#2
TECH Fanatic
iTrader: (25)
Join Date: Nov 2001
Location: SC
Posts: 1,784
Likes: 0
Received 0 Likes
on
0 Posts
Need an M6 file in the VCM.
You will want to get all the pig tails to get the speedo(VSS) working and maybe the reverse lights.
There might be others but that is the most important, and you will have to decide how you want to handle the P/N switch.
You will want to get all the pig tails to get the speedo(VSS) working and maybe the reverse lights.
There might be others but that is the most important, and you will have to decide how you want to handle the P/N switch.
