ST80...dyno...n stuff
05-14-2008, 11:27 PM
#1
TECH Fanatic
Thread Starter
iTrader: (4)
Join Date: Aug 2002
Location: Colorado Springs
Posts: 1,243
Likes: 0
Received 0 Likes
on
0 Posts
ST80...dyno...n stuff TTi Race Kit + ST80
RMCR did all the custom fab of the ST80.
Kaz Motorsports did the ecu swap and 3 bar tune.
low boost ~12psi and higher boost ~xxpsi
This is just a video of spool.
One of the key features is my car is a 98 but now sports a 2002 ecu with 3 bar full SD tune! Guy did the conversion in about 1 business day.
366 cubes
stock ZO6 Cam
cutout open
I have 2 minor issues that need to be resolved but after that it goes back for higher, higher boost.
At the high setting now...the turbo is just getting warmed up
in the video...it low boost and high boost
http://s147.photobucket.com/albums/r...t=SANY0465.flv
RMCR did all the custom fab of the ST80.
Kaz Motorsports did the ecu swap and 3 bar tune.
low boost ~12psi and higher boost ~xxpsi
This is just a video of spool.
One of the key features is my car is a 98 but now sports a 2002 ecu with 3 bar full SD tune! Guy did the conversion in about 1 business day.
366 cubes
stock ZO6 Cam
cutout open
I have 2 minor issues that need to be resolved but after that it goes back for higher, higher boost.
At the high setting now...the turbo is just getting warmed up
in the video...it low boost and high boost
http://s147.photobucket.com/albums/r...t=SANY0465.flv
Last edited by MECHAM; 05-15-2008 at 11:48 AM.
05-14-2008, 11:58 PM
#6
TECH Fanatic
Thread Starter
iTrader: (4)
Join Date: Aug 2002
Location: Colorado Springs
Posts: 1,243
Likes: 0
Received 0 Likes
on
0 Posts
yes and no...the bottom piping is all the same...but the mounting location is different.
new bracket for holding the turbo was fabbed. But it still uses the same crossover piping
new inlet for the turbo had to be made
new bracket for holding the turbo was fabbed. But it still uses the same crossover piping
new inlet for the turbo had to be made
Last edited by MECHAM; 05-15-2008 at 10:35 AM.
Trending Topics
05-15-2008, 10:31 AM
#10
TECH Fanatic
Thread Starter
iTrader: (4)
Join Date: Aug 2002
Location: Colorado Springs
Posts: 1,243
Likes: 0
Received 0 Likes
on
0 Posts
The turbo in that video was an Innovative T80..now I have an ST80
thats a great clip!!
05-15-2008, 02:45 PM
#15
Staging Lane
Join Date: May 2005
Location: Rio Rancho, NM
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
Nice TA man! How laggy is that ST80 compared to the T80? I am thinking of going with the ST76 but if your not getting that much lag at your altitude I might go with the ST80. I ran out of air with my ST70.
-Tim
-Tim
05-15-2008, 04:18 PM
#18
9 Second Club
05-15-2008, 05:30 PM
#20
TECH Enthusiast
iTrader: (3)
Join Date: May 2002
Location: Nashville, TN
Posts: 642
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the info! I was just wondering if the housing cleared the water pump and everything else. I can get some help on fabbing stuff like the bracket and new charge piping is no problem.