Exhaust pop when shifting
05-15-2008, 02:14 PM
#1
Launching!
Thread Starter
iTrader: (3)
Join Date: Apr 2008
Location: Lancaster, PA
Posts: 215
Likes: 0
Received 0 Likes
on
0 Posts
Exhaust pop when shifting Hey
My car is an 02 WS6 M6 with 112k on it. It also has an Borla exhaust that was installed by a previous owner. The car will make a pop noise on decel when I go to shift. It's more noticeable the higher the rpm's when I shift and is louder when the car is cold. I have already replaced the plugs with NGK TR55's and MSD wires. I have no idea if the cats have been touched or not and I believe the stock exhaust manifolds are still on the car. I'm assuming this is just some unburnt fuel working it's way out and that it's not a big deal but just wanted to make sure.
My car is an 02 WS6 M6 with 112k on it. It also has an Borla exhaust that was installed by a previous owner. The car will make a pop noise on decel when I go to shift. It's more noticeable the higher the rpm's when I shift and is louder when the car is cold. I have already replaced the plugs with NGK TR55's and MSD wires. I have no idea if the cats have been touched or not and I believe the stock exhaust manifolds are still on the car. I'm assuming this is just some unburnt fuel working it's way out and that it's not a big deal but just wanted to make sure.
05-15-2008, 04:05 PM
#4
Launching!
Thread Starter
iTrader: (3)
Join Date: Apr 2008
Location: Lancaster, PA
Posts: 215
Likes: 0
Received 0 Likes
on
0 Posts
I figured that's what it was but wanted to make sure I hadn't gaped a plug wrong or something. Thanks for the help. Now I'll have to try it at night and see if I get fire!! FIRE FIRE!!!
