Joecrunk101

i recently bought a p 600 supercharger from someone on a classified i didnt look much into them it was 400 bucks for the kit so i said **** it and just picked it up i wanna use it on my 85 trans am the mounting bracket looks like it wont work anyone have any ideas

MadIceV8

iTrader: (12)

Mounting brackets vary from car to car. Do a search and you should be able to find one. Also the flow of the blower could be different (F-bodies are reverse flow). And if I remember correctly the P600 is the old version of the P1sc's.

95 Silver TA

iTrader: (1)

They are very similar. I read of a few on z28.com (years ago) folks with the p600b making over 500RHWP, some I believe made over 600RWHP.

The Ps1c is self contained the 600 requires the oil line. If I remember correctly the P1sc make just a little more boost/power the the p600 thats why I went that route and it was self contained (plus I got a great deal).

This is what ATI website has on the blower specs:

http://www.procharger.com/models.shtml

ChevyChad

iTrader: (50)

The LS1 f-bodies are reverse rotation, and the LT1's are regular rotation. Basically, you need to figure out which one you have. I'd assume you have a standard rotation unit, I don't know if they even made a reverse rotation 600 for LS1's, but I could be wrong. Once you determine which rotation, you need to make sure you face it the right way.

wavebyby

iTrader: (1)

just found a p600 for sale $700 is that to high of a price and will it work on my 2000 camaro ss

usdmholden

I would stay away from the P600B. It's old, obsolete, and the ones I worked on in the past were problematic at best.

Also I doubt there are brackets for your car.

Bob@BruteSpeed

iTrader: (16)

No, it won't work. ProCharger never used the P600B on the 98-02 F Body, and the mounting bracket is completely different from the one used on the P-1SC-up. Bob

Bob@BruteSpeed

iTrader: (16)

http://shop.brutespeed.com/ATI-3CABB...-3CABB-001.htm
Here is the standard SBC P600B mounting bracket. I do not know if you have clearance for this mounting location in your 3rd gen, but it looks like it should work based off the kit for the P-1SC shown here. http://shop.brutespeed.com/ATI-1GC21...1GC211-SCI.htm. Bob