Tuning Help! Scan tool info
05-27-2008, 12:51 PM
#1
Registered User
Thread Starter
Join Date: Apr 2008
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Tuning Help! Scan tool info I just got my s/c ls6 back together and it now has a lowered compression ratio etc. I plugged in my Genisys Scan tool and recorded information during boost and off boost. If I post the info can someone help me read it and make sure everything is good? Here are the highlights I have recorded
TP Angle
rpm
ect
Spark +/-
Knock retard
map psi kpa
map voltage
maf
fuel pump pressure
fuel table
bank 1 sensor 1 o2
bank 2 sensore 2 o2
Will this data help me have a general idea of how the engine is operating? It has a vortech program isntalled I believe, just as a fyi.
HELP!
Thanks,
Dustin
TP Angle
rpm
ect
Spark +/-
Knock retard
map psi kpa
map voltage
maf
fuel pump pressure
fuel table
bank 1 sensor 1 o2
bank 2 sensore 2 o2
Will this data help me have a general idea of how the engine is operating? It has a vortech program isntalled I believe, just as a fyi.
HELP!
Thanks,
Dustin
Last edited by Boosted04z06; 05-27-2008 at 12:51 PM. Reason: Im stupid
