Gemini Plate w/ Standalone Installation pics.
#1
10 Second Club
Thread Starter
iTrader: (5)
Join Date: Jul 2005
Location: by my computer
Posts: 2,958
Likes: 0
Received 0 Likes
on
0 Posts
Gemini Plate w/ Standalone Installation pics.
Real Performance Motorsports... the shop that you always see in the GM HighTech and High Performance Pontiac Magazines completely redid my nitrous installation. Looks pretty good in my opinion.
behind the elbow: Purge, Nitrous selenoid etc
You can see the plate from the side shot:
Pics of the bottle: 860 spare mount plate
Car made 565rwhp on a 150 shot.... after making 425rwhp on motor with a nitrous tune of 20 degrees.
behind the elbow: Purge, Nitrous selenoid etc
You can see the plate from the side shot:
Pics of the bottle: 860 spare mount plate
Car made 565rwhp on a 150 shot.... after making 425rwhp on motor with a nitrous tune of 20 degrees.
Trending Topics
#9
TECH Fanatic
iTrader: (1)
Join Date: Mar 2004
Location: Southern NH
Posts: 1,644
Likes: 0
Received 0 Likes
on
0 Posts
Looks good,
The only thing that jumps out at me is that you have a hard line from your fuel cell (attached to body) to your solenoid (attached to motor). Do you have solid motor mounts? If not, you should make that one a flex line to allow the motor to move around without fatigue-ing that line, or at least a short flex coupling.
The only thing that jumps out at me is that you have a hard line from your fuel cell (attached to body) to your solenoid (attached to motor). Do you have solid motor mounts? If not, you should make that one a flex line to allow the motor to move around without fatigue-ing that line, or at least a short flex coupling.